£0.00

No products in the basket.

Easter Notice: Orders placed after 2:00 PM on Thursday, March 28th, will be shipped on Tuesday, April 2nd.

£0.00

No products in the basket.

Easter Notice: Orders placed after 2:00 PM on Thursday, March 28th, will be shipped on Tuesday, April 2nd.

FREE Next Working Day
Delivery over £10*

Everbuild Everflex Lead Mate Sealant Grey - 295 ml

Home Shop Sealants & Adhesives Everflex Everbuild Everflex Lead Mate Sealant Grey – 295 ml
Product SKU: SOLEVLEAD
£6.50incl VAT.
£5.42excl VAT.
In Stock

The Everbuild Lead Mate Sealant is a low-modulus neutral cure sealant explicitly crafted for lead, delivering an ultra-robust, long-lasting bond resilient to weathering.

  • Excellent adhesion to metals, without any staining cement or corroding soft metals
  • Low dirt pick-up with excellent flexibility of +/- 25%
  • Fantastic temperature resistance, both low and high
  • Low shrinking during vulcanisation (<5%)
  • Overall, exceptional weathering-resisting properties
  • Certified under the harmonised European standard EN15651
Frequently Bought Together:
-
+
£5.99 Incl VAT £4.99 Excl VAT
This image displays the front of the product which is a Everbuild Professional Sealant Gun - C3 (280ml - 310ml)
-
+
£7.99 Incl VAT £6.66 Excl VAT
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
Quantity Price
1 - 5 £6.50
6 - 11 £5.59
12 - 24 £4.50
25+ £3.19
Total Price
£6.50 Incl VAT
£5.42 Excl VAT

Uses

The Lead Mate by Everbuild is perfect for lead-based applications, with its exceptional compatibility with lead, general metals, and even cement. It's formulated with excellent flexibility, resistance to high and low temperatures and general weathering, making it perfect for external applications. Everbuild tested it and complied with European Standard EN15651, allowing this product to be suitable for facade interior and exterior and cold climates.

Preparation

You should prepare the surface before application; otherwise, you risk failing to achieve optimal results. Remove all contaminants on the surface that can interfere with the bonding; this includes dirt, dust, oil, grease, etc. Priming is typically not required, but in certain applications, it may be needed; if you are unsure, complete a preliminary test.

Application

  1. Cut the top of the cartridge, taking care not to damage the threading screw.
  2. Cut the nozzle at a 45° angle, with an opening to the required amount and place it into a standard applicator tool.
  3. Point the tip of the cartridge to the surface and squeeze the trigger, extruding the sealant.
  4. Smooth down the surface within 5 minutes of the application.

Read the Technical Data Sheet for full information about different applications.

Limitation and Notes

  • Do not use this product in conjunction with bitumen, asphalt, neoprene and specific organic elastomers.
  • This product is not suitable for application to surfaces that bleed oils, solvents, or plasticisers.

Additional information

Product Type

Sealants & Adhesives

Chemical Base

Neutral cure silicone

Colour

Lead grey

Density

1.3-1.4g/cm³

Shore A Hardness

20-30

Tensile Strength

0.6MPa (ISO8339 at break)

Elongation at Break

>200% (ISO8339)

Elastic Recovery

>70% (ISO7389)

Movement Capability

+ or -25%

Service Temperature

-50°C to + 150°C

Joint Design

6-40mm Maximum depth, 50% of joint width

Consumption

10.5 linear meters as a 6mm diameter bead

Ambient Air Temperature

+5°C to + 40°C

Skin Time

30 – 45 mins

Shrinkage

<5%

Tensile Modulus at 100% Elongation

ca. 0.3MPa

Product Information

Product Type

Sealants & Adhesives

Chemical Base

Neutral cure silicone

Colour

Lead grey

Density

1.3-1.4g/cm³

Shore A Hardness

20-30

Tensile Strength

0.6MPa (ISO8339 at break)

Elongation at Break

>200% (ISO8339)

Elastic Recovery

>70% (ISO7389)

Movement Capability

+ or -25%

Service Temperature

-50°C to + 150°C

Joint Design

6-40mm Maximum depth, 50% of joint width

Consumption

10.5 linear meters as a 6mm diameter bead

Ambient Air Temperature

+5°C to + 40°C

Skin Time

30 – 45 mins

Shrinkage

<5%

Tensile Modulus at 100% Elongation

ca. 0.3MPa

Related Products