£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Sika MultiSeal Self Adhesive Bituminous Sealing Tape - Grey (150mm x 10m)

Home Shop Tape Foil Tape Sika MultiSeal Self Adhesive Bituminous Sealing Tape – Grey (150mm x 10m)
Product SKU: SKMULTI150
£19.99incl VAT.
£16.66excl VAT.
Out of Stock

The Sika MultiSeal is a high-quality, self-adhesive bituminous sealing tape perfect for exterior repair, protection, and sealing applications.

  • Super easy to apply
  • Suitable for application at low temperatures
  • Great adhesion to most common building substrates
  • Self-adhesive that’s suitable for painting over
  • Fantastic waterproofing, heat stability and resistance to UV light
Frequently Bought Together:
This image displays the front of the product which is a OX Tools Waterproof Thermal Latex Gloves
OX Tools Waterproof Thermal Latex Gloves
Sizes
-
+
From: £5.99 Incl VAT £4.99 Excl VAT
OX Honey Nubuck Safety Boot
Size

In stock

-
+
From: £49.99 Incl VAT £41.66 Excl VAT
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
Total Price
£19.99 Incl VAT
£16.66 Excl VAT

Out of stock

Get notified once the product comes in stock

Uses

The MultiSeal by Sika is an outstanding product that's perfect for completing various remedial work on the exterior of a building. Sika's scientists formulated this product with a high-strength self-adhesive tape, perfect for application onto most building substrates. It's created with a laminated metal film in aluminium and reinforced by a polyester film on the upper side, all of which are suitable for paints to be applied onto. Applications this product has been used on include;

  • Facades
  • Broken roof tiles
  • Leaking roof gutters
  • Chimneys and roof lights
  • Trailers and Caravans
  • Office containers
  • Roofs, including sheet metal work
  • Various types of ductwork

Preparation

Preparation is essential; if not completed correctly, it can cause further problems in the future. Ensure the surface on which you intend to apply this is stable, clean, dry, and free from contaminants such as dirt, grease, oil, etc. Also, note that this product creates stress during movement, so ensure it's applied appropriately. You can enhance the adhesion of this product using the appropriate primer/propriety to clean the surface before application.

Application

  1. Cut the tape to the required length and release the film.
  2. Place it into place, pressing firmly, using a hard-wheeled roller or another suitable tool to ensure no air is trapped.
  3. You can enhance adhesion further by heating it whilst it's on the surface.
  4. Any overlaps must be at least ≥ 50 mm.

Limitations and Notes

  • This product is suitable for painting systems except for solvent-based paints.
  • Do not use this product on natural stone.
  • This product can cause discolouration on the tape, coatings, plastic or natural stone.
  • Water can infiltrate underneath on porous surfaces if not applied correctly, causing adhesion issues.
  • Direct contact with joint sealants and adhesives must be avoided, or a preliminary test must be done to check for compatibility.
  • Joints under pressure or water immersion applications are not suitable for this product.

Additional information

Chemical Base

Bituminous tape laminated with polyester reinforced film made of metal (aluminium or copper)

Thickness

~1.5 mm (including metal film) (DIN EN 1849-1)

Tensile Strength

Aluminium lamination: Longitudinally ≥ 200 N/50 mm – Transversally ≥ 200 N/50 mm (EN 12311-1)
Copper lamination: Longitudinally ≥ 400 N/50 mm – Transversally ≥ 400 N/50 mm (EN 12311-1)

Elongation at Break

Aluminium lamination: Longitudinally ≥ 20 % – Transversally ≥ 20 % (EN 12311-1)
Copper lamination: Longitudinally ≥ 10 % – Transversally ≥ 10 % (EN 12311-1)

Service Temperature

-20 °C min. / +70 °C max.

UV Exposure

The aluminium film provides the UV resistance

Ambient Air Temperature

+5 °C min. / +40 °C max

Substrate Temperature

+5 °C min. / +40 °C max. Minimum +3 °C above dew point temperature

Technical Data Sheet

Product Information

Chemical Base

Bituminous tape laminated with polyester reinforced film made of metal (aluminium or copper)

Thickness

~1.5 mm (including metal film) (DIN EN 1849-1)

Tensile Strength

Aluminium lamination: Longitudinally ≥ 200 N/50 mm – Transversally ≥ 200 N/50 mm (EN 12311-1)
Copper lamination: Longitudinally ≥ 400 N/50 mm – Transversally ≥ 400 N/50 mm (EN 12311-1)

Elongation at Break

Aluminium lamination: Longitudinally ≥ 20 % – Transversally ≥ 20 % (EN 12311-1)
Copper lamination: Longitudinally ≥ 10 % – Transversally ≥ 10 % (EN 12311-1)

Service Temperature

-20 °C min. / +70 °C max.

UV Exposure

The aluminium film provides the UV resistance

Ambient Air Temperature

+5 °C min. / +40 °C max

Substrate Temperature

+5 °C min. / +40 °C max. Minimum +3 °C above dew point temperature

Technical Data Sheet

Related Products