£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Everflex Mirror Mate Adhesive - White 290ml

Home Shop Sealants & Adhesives Everflex Everbuild Everflex Mirror Mate Adhesive – White 290ml
Product SKU: MIRROR
£7.99incl VAT.
£6.66excl VAT.
In Stock

Everbuild Mirror Mate is a high-quality adhesive based on MS Polymer technology, crafted into a purpose-built product for bonding mirrors onto the most common substrates.

  • Excellent chemical resistance
  • Suitable for adhering to damp surfaces
  • Suitable for overpainting with certain paints
  • Neutral cure adhesive system, harmless for mirror backings
  • Excellent primer less adhesion to most common surfaces
  • Fast-curing, tack-free in 10 minutes, and fully curing between 24-48 hours
Frequently Bought Together:
This image displays the front of the product which is a Everbuild Professional Sealant Gun - C3 (280ml - 310ml)
-
+
£7.99 Incl VAT £6.66 Excl VAT
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
Quantity Price
1 - 2 £7.99
3 - 5 £5.66
6 - 11 £5.00
12+ £4.33
Total Price
£7.99 Incl VAT
£6.66 Excl VAT

Uses

The Mirror Mate by Everbuild is a unique, purposely crafted product for adhesion onto mirror backings, utilising a high-strength neutral curing composite which is harmless for these surfaces. Other benefits this product offers are chemical resistance, which allows household cleaners to not deteriorate it, alongside its suitability for overpainting with water and gloss-based paints, allowing you to blend the adhesive in flawlessly. Application this product is typically applied in includes;

  • Bonding mirrors onto most common substrates
  • Jointing cladding panels
  • Nail replacement, even on damp surfaces
  • Bonding difficult surfaces together, e.g. metal and fibreglass
  • Any application that requires a high-performance, durable bonding of joints
  • Applications where resistance to the chemicals is a necessity.

Preparation

It's important to prepare the surfaces properly before commencing the application. Otherwise, you risk not achieving optimal results, so start by cleaning all surfaces and removing contaminants such as dirt, dust, grease, oil, etc.

Application

  1. Cut the tip of the cartridge, taking care not to damage the threaded screw
  2. Cut the nozzle at a 45° angle with a 6mm opening and place it into a standard sealant applicator gun
  3. Apply adhesive beads to the back of the mirror in vertical strips spaced at 30-40mm centres.
  4. Bring the surfaces together and secure them with firm, even pressure, with a slight twist to disperse some adhesive.
  5. Using tape provides temporary support whilst the adhesive cures, which can take 24-48 hours.

Limitations and Notes

  • When fixing mirrors, you should always use temporary support until the adhesive has cured
  • With large mirrors, you should use this product in conjunction with mechanical fixings.
  • Overhead mirrors should have mechanical fixings used in conjunction with this product.
  • This product is not suitable for aquarium manufacturing.
  • This product isn't suitable for constant water immersion or structural glazing systems
  • Do not use this product in conjunction with bitumen or asphalt
  • Prime highly porous surfaces such as new concrete or stoneworks
  • Do not use this on substrates that bleed oils, solvents or plasticisers.
  • Do not use this on polyethene safety-backed mirrors, polypropylene or Teflon
  • Yellowing discolouration can occur in the dark

Additional information

Density

1.49 g/cm³

Shore A Hardness

50-60

Elongation at Break

>60%

Service Temperature

-40°C to +100°C

Consumption

10 linear metres per tube (approx)

Curing Rate

1mm per 24 hours

Skin Time

10 mins @ 20°C

Application Temp Resistance

+5°C to +30°C

Overpaintability

Overpaintable

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C

Colour

White

Packaging

290ml

Technical Data Sheet

Safety Data Sheet

Product Information

Density

1.49 g/cm³

Shore A Hardness

50-60

Elongation at Break

>60%

Service Temperature

-40°C to +100°C

Consumption

10 linear metres per tube (approx)

Curing Rate

1mm per 24 hours

Skin Time

10 mins @ 20°C

Application Temp Resistance

+5°C to +30°C

Overpaintability

Overpaintable

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C

Colour

White

Packaging

290ml

Technical Data Sheet

Safety Data Sheet

Related Products