Bond It Contractors Grade PVA - White 500ml 
Timco Self-Drilling Wing-Tip Metal Construction Screw 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 3.5mm x 25mm (Tub of 2000) 
Timloc Universal Slate Roof Vent PVC Pipe Only 
FrogTape® Multi-Surface Masking Tape - Green 24mm x 41.1m 
Universal Hip Support System Tray - 1.2m 
Klober Uni-line Vent Slate Grey 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
Bond It Oil Stain Remover - White 1L 
Samac Snowguard - 225mm x 2m 
Ronseal Precision Finish Brush - 1.5 Inch 
Ronseal One Coat Stain Block - White 750ml Dry Fix Accessories
Best Sellers
-
Predator Gloves, Orange / Yellow
From: £2.49 Incl VAT £2.08 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Spax Phillips Ph3 Drill Bits – 25mm (Pack of 5)
£7.49 Incl VAT £6.24 Excl VAT Add to basket -
Everbuild Triple Action Wood Treatment – 25 Litre
£79.99 Incl VAT £66.66 Excl VAT Add to basket -
Ronseal One Coat Damp Seal – White 2.5L
£29.80 Incl VAT £24.83 Excl VAT Read more -
Leather Roofers Tool & Nail Pouch, Dark Brown
£39.99 Incl VAT £33.33 Excl VAT Add to basket -
Bond It Cover-It Carpet Protector – Clear 625mm X 25M
£12.99 Incl VAT £10.83 Excl VAT Add to basket
Dry Fix Accessories
While it is common to sometimes mortar in the ends of the roof verge even in a structure that is otherwise dry fix, for roofers looking for a totally dry tiling arrangement the Easy Trim End Cap and Starter Unit are vital. These are both made of a polypropylene polymer that is highly resistant to heat, weather, and UV rays. In addition, both are totally watertight, protecting the vulnerable underbelly of the verge tiles from the weather and also any wayward wildlife.
Why should I use an End Cap and Starter Unit?
The End Cap and Starter Unit are important because they serve to seal off each end of a set of verge tiles without any need for mortaring. The less a roof relies on mortaring, the more resistant to the weather it is and the more it can flex to absorb damage.
The Starter Unit is mounted where the verge meets the eaves of the roof. The End Cap on the other hand is mounted where the verge meets the ridge at the top of the roof. Both are critical to implementing a full dry fix roof.
