Code 3 Cast Lead - 450mm x 6m 
Timco Hazard Tape 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
Easy-Trim Over Fascia Vent - 10mm x 1m 
OX Pro Aluminium Hawk - 13 inch x 13 inch 
Everbuild Black Jack 908 DPM – 25 Litre 
Soudafoam Gap Filler Gun Grade – 750ml (Box of 12) 
ALM Code 4 Milled Lead - 150mm x 3m 
FloPlast Half Round Downpipe Branch 67.5°, Brown 
Code 5 Cast Lead - 240mm x 3m 
Permavent Black Breather Membrane – 1m x 20m 
Code 8 Cast Lead - 180mm x 6m 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Code 4 Cast Lead - 510mm x 3m 
Siroflex Trade Hand Held PU Expanding Foam 
ALM Code 5 Milled Lead - 914mm x 3m 
Uses
The Bond It All Weather Roofing Compound - Black 5L is an excellent, general-purpose, high-performance, waterproofing compound that protects your roof from the environment. Its excellent formula allows it to resist water, drying into a tough, black coating. Its versatility is unmatched with it adhering to surfaces including;
- Asphalt
- Roofing Felt
- Corrugated Iron
- Fibre/Cement Slates
- Lead
- Copper
- Zinc
Preparation
Before commencing the application, you should ensure the surface is free from contaminants that can hinder the adhesion. Remove any dirt, dust, grease, oil, rust, and organic growth using a wire brush, fungicide, or rust inhibitor.
Application
- Stir the All Weather Roofing Compound thoroughly before using
- Apply to the surface via broom or brush
- Apply each coat at right angles to the previous one
- It should be applied to the surface at a maximum rate of 0.75 litres per m²
- Allow each coat to dry thoroughly before applying another; drying times can take up to 24 hours.
Limitation and Notes
- This product should not be used in areas subsequent to solvent contact
- Do not apply this product in potable drinking water tanks
- Ensure you allow sufficient drying time between coats.
- Bitumen naturally bleeds through paints, so a primer should be applied over the bitumen before painting.
