Soudal Soudabond 265 Classic Spray - 500ml 
Klober Profile-Line Twin Plain Tile Vent - Slate Grey KG9861-0429 (Box of 10) 
Ronseal Interior Varnish - Clear Satin 2.5L 
Klober Permo Ultra 120 - 1m x 50m 
Bond It B1 Fire Resistant PU Aerosol Expanding Foam - Pink 750ml 
FloPlast Square Line Stop End Outlet White – 114mm x 65mm 
Everbuild Stixall Extreme Power – Black 290ml 
Soudal Fix ALL Turbo - White 290ml 
Soudal Fix ALL X-treme Power - White 290ml 
Klober Double Roman Roof Tile Vent - Brown KG9857-3-0247 (Box of 10) 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
FloPlast Half Round Internal Stop End, White – 112mm 
Bond It One Hit Wonder Lightweight Filler - White 1L 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
Bond It Cover-It Carpet Protector - Clear 625mm X 25M 
Bond It Mould Stop - Clear 5L 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm 
Soudafoam Window & Door Xtra Gun Grade, Champagne - 750ml 
Standard Brush 2-Inch 
OX Pro Chalk Refill, Red - 226g 
Everbuild Anchorset Green 150 - Grey 150ml 
Evercryl Emergency Roof Repair - Clear 310ml 
Uses
The Bond It Bitumen Primer is an excellent primer that provides a key for subsequent bituminous coatings. It is ideal for those dealing with challenging substrates that won't naturally accept bituminous products. All you need to do is apply this primer before, allow it to dry, and then proceed with your application, repairing, sealing, treating, and generally improving the surface. This product's versatility is unmatched, providing keys to challenging substrates such as;
- Bitumen felt
- Mastic asphalt
- Weathered corrugated iron and steel
- Fibre cement
Preparation
To achieve optimal adhesive results with the bitumen primer, clean the surface and remove contaminants, including dirt, dust, grease, oil, organic growth, loose debris, etc. If the surface is suffering from a lot of organic growth, use a fungicide to eradicate it, and any rusting surface should be treated with a rust inhibitor.
Application
- Apply via brush or pile roller
- Apply a thin coat of bitumen primer, taking care not to cause any pooling
- Any area to be waterproofed should have the coat applied at least 75mm wide around it for secure sealing
- Leave to dry fully for at least 2 - 3 hours
