ALM Code 4 Milled Lead - 450mm x 3m 
BORA - PM-4550 Adjustable Speedhorse XT (Set of 2) 
Bond It Stain Block - 400ml Off White 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
Bond It Organic Cleaner - Clear 2.5L 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Terracotta (Box of 5) 
OX Tools Pro Self Levelling Laser Level - 60m 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
Everbuild 501 PVA - 1 Litre 
Timloc Eaves Comb Filler 1m 
Everflex Contract 125 One Hour Caulk, Brown - 300ml (Box of 25) 
Premium Flashpoint Lead Sealant - Grey 
IKO Shed Felt - Black 8m Roll 
Freeflow Square Gutter System Gutter 90° Angle - Black 
Timco Self-Drilling Wing-Tip Metal Construction Screw 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
FloPlast Half Round Gutter 135° - Black 
FloPlast Half Round Internal Stop End, Brown – 112mm 
Samac Copper Wire Coil 36m x 2mm 
Uses
The Bond It Bitumen Primer is an excellent primer that provides a key for subsequent bituminous coatings. It is ideal for those dealing with challenging substrates that won't naturally accept bituminous products. All you need to do is apply this primer before, allow it to dry, and then proceed with your application, repairing, sealing, treating, and generally improving the surface. This product's versatility is unmatched, providing keys to challenging substrates such as;
- Bitumen felt
- Mastic asphalt
- Weathered corrugated iron and steel
- Fibre cement
Preparation
To achieve optimal adhesive results with the bitumen primer, clean the surface and remove contaminants, including dirt, dust, grease, oil, organic growth, loose debris, etc. If the surface is suffering from a lot of organic growth, use a fungicide to eradicate it, and any rusting surface should be treated with a rust inhibitor.
Application
- Apply via brush or pile roller
- Apply a thin coat of bitumen primer, taking care not to cause any pooling
- Any area to be waterproofed should have the coat applied at least 75mm wide around it for secure sealing
- Leave to dry fully for at least 2 - 3 hours
