ALM Code 6 Milled Lead Flashing - 1200mm x 3m 
Everbuild Stixall Extreme Power – Black 290ml 
Gorilla Tape - Black (48mm x 11m) 
Timco Metal Tapping Screws - PZ Pan Self-Tapping 4 x 3/8 Pack of 1000 
Everbuild Febond PVA - 5L 
ALM Code 4 Milled Lead - 360mm x 3m 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
FloPlast Round Shoe - White 
Ronseal Trade Polyurethane Satincoat Varnish - 2.5L 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Soudal Construction Silicone, Clear - 290ml (Box of 12) 
Timloc Underlay Felt Lap Vent (Pack of 10) 
Soudal Swipex Wipes - 100 Wipes (Box of 6) 
This Dustproof and Hardner from Bond It is exceptional at delivering a protective layer on concrete, offering endless protection to dust, as well as improved resistance to oils, grease and water.
Application
Prepare the surface you intend to use this product on, ensuring all oil, grease, paint, polish and other contaminants that can hinder this product are removed. Once removed, ensure the surface is clean and dry.
Prepare yourself with the appropriate PPE, equip gloves, boots and goggles. Making sure you wear them the entire time you're using this product.
- Apply uniformly and firmly to the surface, using a brush at a rate of 3-5m². Ensure you DO NOT overfill an area and create puddling.
- Allow the first coat to cure overnight.
- Apply a second coat the same way you applied the first coat.
- Please wait 24 hours and wash the floor with clean water OR Apply a third coat and wait another 24 hours to wash it off.
