Everbuild ASBO Graffiti Remover - 400ml 
Code 3 Cast Lead - 360mm x 3m 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
FloPlast Half Round Downpipe Branch 67.5°, White 
Armatool Batten Gauge - Up to 14" 
Estwing Hammer Curved Claw Smooth Face - 20oz 
Everbuild Anchorset Green 150 - Grey 150ml 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
Everbuild KOS Fire Cement Buff – 2kg 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 50M 
OX Pro Tile Nippers 200MM / 8" 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml 
Code 8 Cast Lead - 850mm x 6m 
Ronseal uPVC Cleaner - 750ml 
Timco 65 x 3.75 Galvanised Clout Nails - 1kg 
Klober Uni Angle Ridge End Cap, Black 
ALM Code 4 Milled Lead - 210mm x 6m 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Bond It Dustproof & Hardener - Clear 5L 
Klober Universal Vent 100mm Adaptor - KG968300-1 
ALM Code 5 Milled Lead - 150mm x 6m 
Hedgehog Gutterbrush Clips (Pack of 20) 
Bond It Felt Adhesive - Black 5L 
The Bond It Flashing tape is designed to be used as flashing on flat and pitched roofs, parapets and chimney stacks. This product is also fantastic for sealing around RSJs, flues, concrete columns, guttering and extractor vents. Other applications include replacing and repairing previous flashing, down pipes, waterproofing coping, roof ridges, and overall general roof repairs.
This product is supplied in a roll, this is to offer ease, speed and efficiency when applying, with the properties of the product naturally preventing awkward contours.
Application
Prepare the surface by removing any loose bits with a wire brush, ensuring that there isn't any dust, clean, dry and free from any contaminants that may hinder the adhesion.
- Cut the required length of flashing tape needed, remove the release paper and firmly press down the adhesive bitumen side.
- Ensure there is complete contact by smoothing down with a cloth and removing any present air bubbles.
- Roll down the edges with a wallpaper roller or trowel to ensure a good edge seal. Ensure you take care not to damage the surface of the flashing tape.
- Any connecting flashing tapes should be overlapped with each other by at least 1 inch 25mm an well rolled down.
