Code 7 Cast Lead - 850mm x 3m 
Hambleside Danelaw TV15/4 Tile Vent - Terracotta (Box of 5) 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 330g 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
Thompson's Stain Block Damp Seal - White 750ml 
FloPlast Half Round Gutter 90° Bend, White – 112mm 
ALM Code 3 Milled Lead - 800mm x 3m 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
Bond It Duct Tape - Black 48mm x 45M 
ALM Code 7 Milled Lead - 1000mm x 3m 
FloPlast Half Round Downpipe 112° Bend, White 
Timco Lithium EP2 Grease - 400g 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
This Bond It Stabilising Solution is perfect for pre-treatment for old, weathered, chalky porous surfaces. Suitable to be used on most substrates, some of these include; cement, plaster, concrete, plasterboard, renders, pebbledash and MDF.
Application
Prepare all surfaces before application, ensuring that you remove all present debris or flaking material. Remove any mould and organic green growth present, you can use MOULD-STOP, PATIO-BLASTER or ORGANIC-CLEANER prior to application to eliminate and prevent further growth in that area.
Do not apply this product under 5°C, during rainfall or when frost is imminent. However, you can use this to damp substrates.
- Stir well before use
- Apply using a brush, roller or spray bottle (not atomised)
- You must wait 12 hours to dry
- A second coat me be required on surfaces that are porous or powdery
