OX Trade Plastic Speed Rafters Square Set 
Klober Single Pantile Vent - Antique Red KG9860-0116 (Box of 10) 
Thompson's Emergency Roof Seal - Black 1L 
Everbuild Multi-Stick - White 350ml (Box of 12) 
ALM Code 3 Milled Lead - 1600mm x 6m 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
Cromar Bitumen Trowel Mastic - Black 2.5L 
Bond It AS900 Acoustic Sealant White 900ml - Box of 12 
Everbuild Maximum Torque - White 290ml 
ALM Code 4 Milled Lead - 1200mm x 3m 
ALM Code 8 Milled Lead - 390mm x 3m 
Soudal Construction Silicone, Clear - 290ml (Box of 12) 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 50g 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Soudal Silirub 2, White - 300ml 
Everbuild Febond PVA - 2.5L 
Uses
The 206 Strike Release Oil by Everbuild is an excellent product that's vital in the manufacturing and application of concrete. It uses its solvent and mineral oil-free emulsion to enable concrete shuttering, allowing the safe removal of the shuttering without damaging the existing concrete. Other applications this product can be used for include;
- 206 Strike Release Oil acts as a release agent for smooth, non-absorbent formwork, absorbent formwork, heated formwork (up to 70°C) and textured formwork.
Preparation
All formwork should be cleaned and dry before application. Any residues of rust or concrete must be removed.
Application
- Stir the product thoroughly before using
- Apply undiluted by spray, brush or roller
- Apply a thin, even coverage to the surface; if you overapply this product, you'll cause 'dusting' on the surface.
- Any excess material in moulds should be mopped up before concrete placement.
- For new and unsealed timber or other high-absorbent formwork, pre-treatment is recommended with a second coat before use
- After application, an evaporation period of 20 minutes (at + 20°C) should be observed before casting.
Limitations and Notes
- Only apply a thin film; overdosing can cause dusting.
