Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Bond It Patio Blaster - Clear 5L 
Cromar Vent 3 Classic Breathable Membrane - 1m x 25m 
OX Pro Impact Bit Set - 31 Piece 
Code 8 Cast Lead - 1600mm x 3m 
FloPlast Round 92½° Bend - Brown 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Everbuild P14 System Inhibitor – 1 Litre 
ALM Code 3 Milled Lead - 800mm x 6m 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
ALM Code 8 Milled Lead - 850mm x 6m 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Uses
The ASBO Graffiti Remover by Everbuild is an outstanding, potent product that can effectively remove unwanted marks, paint, felt tips, and all forms of general graffiti from most surfaces. It's achieved through its powerful formula that is easily washable, perfect for any accidents that occur from spillages, etc.
Preparation
- Brush the surface to be treated using a stiff brush, focusing on removing all dust and small debris.
- Application
- Shake the can extensively before starting the application.
- Spray to the surface, thoroughly saturating it, allowing time for it to penetrate, which can take between two minutes and 1 hour, depending on the stain.
- Wipe away the graffiti and rinse the surface using water.
- For stubborn stains, dry the area and repeat the application.
Limitations
- Do not apply this product if the ambient temperature is below 5°C
