£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre

Home Shop Roofing Accessories Bitumen Paint Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre
Product SKU: 90125
£74.99incl VAT.
£62.49excl VAT.
In Stock

Everbuild Blackjack 901 Black Bitumen Paint is a solvent-based, full-bodied black bitumen paint for metal protection. When dry, it forms an odourless, taint-free black film perfect for metal protection, concrete structures and overcoating wood and felt.

  • Fast drying paint
  • Suitable for use on most common building surfaces
  • Resistant to most salt solutions, dilute acids and alkalis, water and alcohol
  • It provides a waterproof, weatherproof and corrosion-resistant protective coating
Frequently Bought Together:
This image displays the front of the product which is a Everbuild Pro Blue Masking Tape - 25mm x 33mm
-
+
£4.99 Incl VAT £4.16 Excl VAT
This image displays the front of the product which is a OX Trade 3 Piece Paint Brush Set - 25.38.50mm
-
+
£8.99 Incl VAT £7.49 Excl VAT
This image displays the front of the product which is a Everbuild Black Jack 902 Bitumen & Flashing Primer – 1 Litre
-
+
£8.99 Incl VAT £7.49 Excl VAT
Total Price
£74.99 Incl VAT
£62.49 Excl VAT

Uses

The Blackjack 901 Black Bitumen Paint by Everbuild offers an outstanding protective coat for most common building surfaces. It is waterproof, weatherproof and corrosion-resistant, ensuring the surface is protected against weather conditions. This product is suitable for multiple surfaces, some of these include;

  • Wood
  • Felt
  • Iron
  • Steel
  • Lead
  • Zinc
  • Aluminium
  • Asbestos-cement
  • Concrete
  • Stone
  • Brick

Preparation

It's required to prepare the surface before starting the application; otherwise, you will not achieve optimal adhesion with this product.

The surface must sound, be stable and thoroughly cleaned; any loose rust or flaking material on metal surfaces must be wire brushed off. This does include any paint on the surface; you must remove it. If the surface is new galvanised metal, the wire brush should be used to roughen the surface to allow optimal adhesion.

To enhance long-term protection, you can prime the surface with a rust-inhibitive product such as red lead or zinc phosphate. Porous surfaces should be primed with a bitumen primer.

Application

  1. This product comes ready to use; stir it thoroughly before using.
  2. A minimum of two coats should be applied to the surfaces by brush or spray, with a 2-4 hour (depending on the weather) gap between coats to allow it to dry.

Limitations

  • This product is not suitable to be in contact with solvents.
  • This product should not be used for potable drinking water tanks.
  • Avoid inhaling the vapours.
  • Allow the surface to dry entirely before applying a second coat.
  • If you want to apply paint over it, this product will likely bleed through it, but a primer used between the bitumen paint and regular paint should prevent that.

Additional information

Shelf Life

24 months from date of manufacture in tightly sealed, undamaged containers.

Storage Conditions

EVERBUILD® BLACK JACK® 901 BLACK BITUMEN PAINT contains a flammable solvent, and all normal precautions against fire must be taken during both storage and use. Store in original container in cool (5°C – 25°C) dry conditions. Keep away from sources of ignition.

Density

ca. 0.9 g/cm³ at 20°C

Viscosity

700-1200 cP

Service Temperature

-20°C to +50°C

Consumption / Yield / Dosage (PRINT single line)

Porous surfaces: 4-6m2
Non-porous surfaces: 11m2

Ambient Air Temperature

5°C – 40°C. Surfaces must be free from ice and water.

Drying time

4-6 hours depending on drying conditions

Technical Data Sheet

Safety Data Sheet

Product Information

Shelf Life

24 months from date of manufacture in tightly sealed, undamaged containers.

Storage Conditions

EVERBUILD® BLACK JACK® 901 BLACK BITUMEN PAINT contains a flammable solvent, and all normal precautions against fire must be taken during both storage and use. Store in original container in cool (5°C – 25°C) dry conditions. Keep away from sources of ignition.

Density

ca. 0.9 g/cm³ at 20°C

Viscosity

700-1200 cP

Service Temperature

-20°C to +50°C

Consumption / Yield / Dosage (PRINT single line)

Porous surfaces: 4-6m2
Non-porous surfaces: 11m2

Ambient Air Temperature

5°C – 40°C. Surfaces must be free from ice and water.

Drying time

4-6 hours depending on drying conditions

Technical Data Sheet

Safety Data Sheet

Related Products