FloPlast Half Round Downpipe Socket, Black 
Thompson's Emergency Roof Seal - Black 1L 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Soudal Roof & Gutter Sealant – Black 290ml 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Clear - 300ml (Box of 12) 
Klober Universal Vent 100mm Adaptor - KG968300-1 
Ronseal uPVC Paint - Royal Blue Satin 750ml 
Ronseal Quick Drying Stain Block - Aerosol White 
Everbuild PVCu Acti-Spray – Clear 200ml 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
ALM Code 5 Milled Lead - 210mm x 6m 
ALM Code 4 Milled Lead - 1000mm x 6m 
OX Tools Diamond Blade Triple Pack 115/22.23mm 
Cromar Black Bitumen Paint – 2.5 Litre 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
ALM Code 7 Milled Lead - 510mm x 6m 
FaithFull Soft Grip Chisel - 4 Piece Set 
Everbuild Mitre Fast Activator – 200ml 
Soudal Genius Gun Gap Filling and Expanding Foam - 750ml (Box of 12) 
FloPlast Square Line Gutter Angle 135° Black 
Code 6 Cast Lead - 240mm x 6m 
OX Pro Chalk Refill, Yellow – 226g 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml 
Uses
The AquaMate Sealant by Everbuild is a purpose-built aquarium manufacturing sealant that's perfect due to its harmless, fish-friendly composite mixed with a sealant suitable for constant water immersion. Despite its purpose-built aquarium manufacturing compatibility, you can also use it in sealing bond liners and all supply and drainage piping.
Preparation
Before commencing the application, preparing the surface is vital to ensure optimal results are achieved. Start by removing contaminants on the surface, including dirt, dust, oil, grease, etc. All glass must be cleaned prior to application.
Application
It's important to thoroughly read the instructions for manufacturing the aquarium, which can be found by reading the technical data sheet. For aquarium manufacturing, you must understand the required dimensions of the joints, and you can calculate this by;
E = 6 x H² x L / [100 x T x 2 (H + L)]
E = required thickness of structural seal in mm
H = height of aquarium in cm
L = Length of aquarium in cm
T = Tensile strength of sealant (kg/cm²)
The Everbuild AqauMate has a Tensile Strength of 10kg
Limitation and Notes
- Highly porous surfaces will require priming to achieve optimal results.
- Not suitable for application on substrates that bleed oils, solvents or plasticisers.
- Due to pond liner materials varying, preliminary tests are suggested to ensure compatibility.
- Always wash out ponds and aquaria after use to ensure you remove residual acetic acid; you can complete a pH test to check
- Ensure all sealants have fully cured before moving or filling with water.
