3 x Oxyturbo Oxygen & Gas Refill 
Timco 25 Spanner Set 
Code 7 Cast Lead - 510mm x 6m 
Hedgehog Gutter Brush Leaf Guard Black - 4m x 200mm 
ALM Code 6 Milled Lead Flashing - 600mm x 3m 
Code 5 Cast Lead - 390mm x 6m 
Code 4 Cast Lead - 914mm x 6m 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
Everbuild KOS Fire Cement Buff – 2kg 
Freeflow Round 112mm Gutter System 135° - Black 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
ALM Code 7 Milled Lead - 180mm x 6m 
Cromar ProRidge Universal Ridge System - 6m Kit 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
Everbuild Bath & Kitchen Sealant – White 290ml 
FloPlast Half Round Running Outlet, White 
ALM Code 4 Milled Lead - 914mm x 6m 
Code 8 Cast Lead - 300mm x 3m 
ALM Code 3 Milled Lead - 240mm x 6m 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
ALM Code 8 Milled Lead - 300mm x 3m 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Code 6 Cast Lead - 1600mm x 6m 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU3 
Uses
The AquaMate Sealant by Everbuild is a purpose-built aquarium manufacturing sealant that's perfect due to its harmless, fish-friendly composite mixed with a sealant suitable for constant water immersion. Despite its purpose-built aquarium manufacturing compatibility, you can also use it in sealing bond liners and all supply and drainage piping.
Preparation
Before commencing the application, preparing the surface is vital to ensure optimal results are achieved. Start by removing contaminants on the surface, including dirt, dust, oil, grease, etc. All glass must be cleaned prior to application.
Application
It's important to thoroughly read the instructions for manufacturing the aquarium, which can be found by reading the technical data sheet. For aquarium manufacturing, you must understand the required dimensions of the joints, and you can calculate this by;
E = 6 x H² x L / [100 x T x 2 (H + L)]
E = required thickness of structural seal in mm
H = height of aquarium in cm
L = Length of aquarium in cm
T = Tensile strength of sealant (kg/cm²)
The Everbuild AqauMate has a Tensile Strength of 10kg
Limitation and Notes
- Highly porous surfaces will require priming to achieve optimal results.
- Not suitable for application on substrates that bleed oils, solvents or plasticisers.
- Due to pond liner materials varying, preliminary tests are suggested to ensure compatibility.
- Always wash out ponds and aquaria after use to ensure you remove residual acetic acid; you can complete a pH test to check
- Ensure all sealants have fully cured before moving or filling with water.
