Ronseal Diamond Hard Floor Varnish - Clear Gloss 5L 
Evercryl Emergency Roof Repair - Clear 310ml (Box of 12) 
Cromar Bitumen Trowel Mastic - Black 1L 
Klober Boll Roll Tile Vent KG6085, Brown 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
ALM Code 7 Milled Lead - 450mm x 3m 
Timco M5 Form A Washer DIN 125 - 50 Pieces 
Code 6 Cast Lead - 450mm x 3m 
ALM Code 8 Milled Lead - 300mm x 3m 
Bond It Lead Pro Roofing & Flashing Sealant - Grey EU3 
Freeflow 112mm Round Gutter System 90° Gutter Angle - Black 
Code 4 Cast Lead - 210mm x 6m 
Everbuild Carpet Fix Cloth Tape – 50mm x 25m 
Klober Profile-Line Limarech Tile Vent - Terracotta KG9859-3-0152 (Box of 10) 
Soudal Swipex Wipes - 100 Wipes (Box of 6) 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
ALM Code 3 Milled Lead - 300mm x 3m 
Soudal Sealant Remover – 400ml 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Bond It Rain-Mate All Weather Sealant - White EU3 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Timloc Inline Slate Vent Black (Box of 5) 
Code 8 Cast Lead - 600mm x 6m 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
ALM Code 4 Milled Lead - 360mm x 6m 
Everbuild Triple Action Wood Treatment – 25 Litre 
Thompson's Emergency Instant Repair Aerosol - Black 450ml 
Siroflex Trade Hand Held PU Expanding Foam 
Uses
The Everflex 500 Bath & Sanitary Silicone by Everbuild is a high-strength, permanently flexible silicone ideal for application in areas that require sanitary standard surfaces or resilience to high humidity levels. Everbuild formulated this product to be versatile; alongside its excellent resistance, it's also developed with a fungicide, preventing any chance of mould growth. Application this product is typically used in include;
- Internal sealing in areas of high humidity or at risk of condensation
- Sealing around baths, basins, showers and sanitary ware
- Sealing around laminates and worktops
- Cap sealing to timber, metal and PVCu window frames.
- As a glue for fixing PVCu trims and panels
- Overall, general weatherproofing application
Preparation
All application surfaces must be prepared properly to achieve optimal results. Remove any old sealant and general contaminants on the surface that can hinder the adhesion, including dirt, dust, oil, grease, etc. Surfaces like glass, metal and aluminium should be cleaned using a proprietary solvent cleaner. Any porous surfaces should be primed before application.
Application
- Cut the top of the cartridge, making sure not to damage the threaded screw.
- Cut the nozzle at a 45° angle, with an opening slightly larger than the gap to fill, and place it into a standard sealant applicator gun.
- Point the tip of the cartridge to the gap and apply one long bead from one side to the other. You can use masking tape to prevent unwanted mess, making the application easier.
- Within 10 minutes of application, smooth down the sealant using a sealant tool, a spatula, or a piece of wood with a soap and water solution.
Limitations and Notes
- This product is not suitable for use in conjunction with bitumen or asphalt.
- Not for application to highly porous surfaces such as new concrete or stonework. Priming is advised.
- Do not apply this product to surfaces that bleed oils, solvents or plasticisers
- Do not use in the vicinity or with double-glazed units
- This product is not suitable for perimeter pointing of PVCu
- Do not use this product on soft metals such as lead or brass
- This silicone sealant is not suitable for overpainting.
