£0.00

No products in the basket.

£0.00

No products in the basket.

FREE Next Working Day
Delivery over £10*

Everbuild Forever Grey Silicone Sealant – 295ml

Home Shop Sealants & Adhesives Glue and Adhesives Everbuild Forever Grey Silicone Sealant – 295ml
Product SKU: FOREVERGY
£10.69incl VAT.
£8.91excl VAT.
In Stock

The Everbuild Forever range is a silicone sealant with a superior hygienic silicone sealant, perfect for application areas which suffer high humidity. Everbuild has tested and certified this product by an independent microbiological laboratory, showing zero mould growth after 10 years of simulated ageing.

  • Permanently waterproof that’s highly flexible
  • Perfect for application areas with high humidity
  • Mould shield protection, proven to achieve 10 years of protection
  • High-quality silicone with excellent bonding properties
Frequently Bought Together:
-
+
£5.99 Incl VAT £4.99 Excl VAT
This image displays the front of the product which is a Everbuild Professional Sealant Gun - C3 (280ml - 310ml)
-
+
£7.99 Incl VAT £6.66 Excl VAT
This image displays the front of the product which is a Everbuild Multi-Use Wonder Wipes Tub (100 Wipes)
-
+
£6.99 Incl VAT £5.83 Excl VAT
Quantity Price
1 - 2 £10.69
3 - 5 £6.66
6 - 11 £5.11
12+ £4.83
Total Price
£10.69 Incl VAT
£8.91 Excl VAT

Uses

The Forever Range by Everbuild is a high-quality mould shield product that can achieve up to 10 years of life without any signs of organic growth, including mould, mildew, or bacteria. It's perfect for application areas that suffer from high humidity levels, achieved by its ability to resist water and organic growth. Overall, it's a highly flexible bond that won't suffer from deteriorating for decades to come. Application this product is typically applied in include;

  • Sealing baths, showers, wetrooms, sanitary ware, kitchens, ceramic tiles and all application areas of high humidity or areas that demand hygiene protection
  • Sealing around window and door frames internally, which are subject to high levels of condensation

Preparation

Before commencing the application, preparing the substrates is vital to ensure you achieve optimal results. Clean the surface by removing contaminants that can interfere with the adhesion, including dirt, oil, grease, dust, etc. Deep gaps should have an expanding foam applied to prevent wasting the sealant. If you're using this product for plastic or acrylic baths, fill it half full with water during the sealing and curing process; this will allow it to accommodate being full and empty.

Application

  1. Start by cutting the top of the cartridge, taking care not to damage the threaded screw.
  2. Cut the nozzle at a 45° angle, with an opening slightly larger than the gap to be filled.
  3. Point the tip of the nozzle to one end of the gap and apply one singular bead along the whole surface. (Note: you can use masking tape to help prevent you from making a mess)
  4. After applying the sealant, tool it down within 15 minutes before the skin starts to form.

Limitations and Notes

  • This product is not suitable for application on surfaces that bleed oils or plasticisers
  • Do not apply this on substrates or areas that are bitumen/pitched-based

Additional information

Product Type

Sealants & Adhesives

Density

0.98 – 1.05 g/cm³

Shore A Hardness

20

Tensile Strength

Approx. 0.6 N/mm² to ISO 8339

Elongation at Break

250% to ISO8339

Movement Capability

25% EN15651-1

Service Temperature

-40°C to +180°C

Curing Time

Approx. 2-3 mm in 24 hours at 23°C/50% RH

Skin Time

Approx. 15-20 mins at 23°C/50% RH

Form

Paste, 1 component RTV silicone

Viscosity

100,000 – 200,000 cP

Modulus at 100% Elongation

0.35 N/mm² to ISO8339

Technical Data Sheet

Safety Data Sheet

Product Information

Product Type

Sealants & Adhesives

Density

0.98 – 1.05 g/cm³

Shore A Hardness

20

Tensile Strength

Approx. 0.6 N/mm² to ISO 8339

Elongation at Break

250% to ISO8339

Movement Capability

25% EN15651-1

Service Temperature

-40°C to +180°C

Curing Time

Approx. 2-3 mm in 24 hours at 23°C/50% RH

Skin Time

Approx. 15-20 mins at 23°C/50% RH

Form

Paste, 1 component RTV silicone

Viscosity

100,000 – 200,000 cP

Modulus at 100% Elongation

0.35 N/mm² to ISO8339

Technical Data Sheet

Safety Data Sheet

Related Products