Soudal Orange Skeleton Gun - Up to 310ml 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Code 7 Cast Lead - 510mm x 3m 
FloPlast Square to Round Downpipe Adaptor - Black 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Standard Brush 2-Inch 
Evercryl Emergency Roof Repair - Clear 310ml 
Soudafoam Gap Filler Genius Gun - 600ml 
Weather Guard Poly-Tarpaulin 
ALM Code 3 Milled Lead - 450mm x 6m 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
Right Hand Klober Contract Dry Verge Unit Grey 
Bostik Brushable Waterproofer - Black 5L 
Soudal Fix ALL Turbo - White 290ml (Box of 12) 
FloPlast Universal Hopper, Brown – 65-68mm 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Sikabond PVA - White 5 Litre 
Everbuild Forever White Grout Reviver - 200ml 
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in 
Uses
This Heat Resistant Paint by Everbuild is excellent at resisting high temperatures of heat, and it is designed to be applied in domestic settings, such as ovens, flutes, chimneys etc. It has an easy application; you can either spray or brush this product onto the surface.
Preparation
Ensure all surfaces are cooled and free from impurities that can hinder this product, that includes rust, dust, soot, grease etc.
Application
- Shake the can vigorously for at least 1 minute before application.
- Hold the can 15-20 cm from the surface and spray in long, even strokes.
- The paint film will harden once the article is heated for the first time.
- This product will take 15 minutes to dry on the surface; however, it will take 1 hour to handle. The paint will fully cure once the surface has been heated up for the first time. Alternatively, you can stove the object for about 20 minutes at 200-220°C.
Limitations
- It is recommended to be done in a well-ventilated area.
- Low temperature/high humidity will impair drying.
- Do not apply this product when the ambient temperature is below 5°C or RH exceeds 90%
- Avoid inhalation of vapours and spray mists.
- Do not spray on naked flames or any incandescent materials.
