Ronseal Exterior Yacht Varnish - Satin 500ml 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m 
IKO Easymelt Bonding Bitumen Keg - 10kg 
OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
Code 5 Cast Lead - 1600mm x 3m 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Klober Flexipipe 75/100mm - (KG972400) 
Code 6 Cast Lead - 390mm x 3m 
Ronseal One Coat Stays White Radiator Paint - Gloss 250ml 
Youngman Double Section Roof Ladder 4.89m (57664600) 
Everbuild 501 PVA – 500ml 
Soudal Pro 40P PU Wood Adhesive - 750g 
ALM Code 5 Milled Lead – 650mm x 6m 
Ronseal Wet Rot Wood Hardener - 250ml 
Armatool High Visibility Marking chalk (200g) 
Timloc Interlocking Plain Tile Vent Brown (Box of 12) 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Uses
This Heat Resistant Paint by Everbuild is excellent at resisting high temperatures of heat, and it is designed to be applied in domestic settings, such as ovens, flutes, chimneys etc. It has an easy application; you can either spray or brush this product onto the surface.
Preparation
Ensure all surfaces are cooled and free from impurities that can hinder this product, that includes rust, dust, soot, grease etc.
Application
- Shake the can vigorously for at least 1 minute before application.
- Hold the can 15-20 cm from the surface and spray in long, even strokes.
- The paint film will harden once the article is heated for the first time.
- This product will take 15 minutes to dry on the surface; however, it will take 1 hour to handle. The paint will fully cure once the surface has been heated up for the first time. Alternatively, you can stove the object for about 20 minutes at 200-220°C.
Limitations
- It is recommended to be done in a well-ventilated area.
- Low temperature/high humidity will impair drying.
- Do not apply this product when the ambient temperature is below 5°C or RH exceeds 90%
- Avoid inhalation of vapours and spray mists.
- Do not spray on naked flames or any incandescent materials.
