Klober 15x9 Tile Vent - Brown KG9690-0247 (Box of 10) 
Timco Air Wedge 
Soudal PVCu Solvent Frame Cleaner - 1L 
Everbuild Quick Drying Clear Varnish - Gloss 750ml 
OX Heavy Duty Soft Gel Filled Knee Pad 
Code 8 Cast Lead - 240mm x 3m 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
Bond It Cover-It Carpet Protector - Clear 625mm X 25M 
Bond It FG8 Food Grade Silicone - White 310ml 
Bond It Economy Sealant Gun - Blue 900ml 
Restec GRPROOF 1010 Base Coat Resin - 10kg 
ALM Code 3 Milled Lead - 450mm x 6m 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
Code 6 Cast Lead - 390mm x 6m 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
OX Tough Builders Socks (UK 6-11) 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Slate Grey (Box of 5) 
Bond It Contractors Grade PVA - White 500ml 
Everbuild Seal Rite Strip Out Tool 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
Lead Hall Fixing Clips - Pack of 50 
ALM Code 7 Milled Lead - 360mm x 6m 
1201 Telescopic Underfloor Vent 3-5 Courses 
500 x Felt Support Trays 1.5m (Half Pallet) 
Klober Profile-Line Twin Plain Tile Vent - Slate Grey KG9861-0429 (Box of 10) 
Klober Regent Tile Vent KG6084, Grey 
Freeflow Square Gutter System Gutter 90° Angle - Black 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Antique Red (Box of 5) 
Klober Uni-line Vent Slate Grey 
Uses
The JETCEM Rapid by Everbuild is the ultimate quick repair product for concrete-based surfaces. Everbuild's technicians have formulated the JETCEM with a superb, fast-setting product, enabling swift application and easy repair. Applications where the JETCEM is perfect include;
- Internal and external repairs to gaps and cracks on floors and walls
- Repairing flagstones, slabs, stones and bricks
- Patching window sills and steps
- Jointing earthenware drains and pipes
- Repairing ponds and pools
- Setting in W/C's and sinks
- Leak sealing in concrete-based surfaces
- Setting posts and railing
Preparation
Before commencing the application, it's essential to prepare the surface. Complete this by removing any contaminants on the surface that can hinder the adhesion, including dirt, dust, oil, grease, etc.
Application
- Using a clean vessel, mix 3 parts volume powder to 1 part cold, clean water. You should only mix enough for up to 10 minutes of work, as after 10 minutes, the mixture becomes invalid for use. To know you've mixed it correctly, you should finish with a reasonably thick slump-free paste.
- Saturate the surface entirely using water.
- Using a trowel or filling knife, scoop the mixture into the application area.
- In warm conditions, you can cover the JETCEM with polyethene to assist in the curing process.
Limitations
- When mixing, it's important to mix only enough for up to 10 minutes. After 10 minutes, it will stiffen and become invalid; you cannot add water to it to try and soften it; this will weaken the cement.
- This product should not be used for load-bearing applications.
- Do not use this for holes deeper than 25mm.
- Do not apply where chemical resistance is required.
