Ronseal Exterior Yacht Varnish - Satin 500ml 
ALM Code 5 Milled Lead - 1000mm x 6m 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
Ronseal Multi Purpose Powder Smooth Finish Filler - 500g + 50% 
Ronseal Diamond Hard Floor Varnish - Clear Matt 2.5L 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
Timloc Non-Profile Tile Vent Grey (Box of 8) 
FloPlast Half Round Fascia Bracket, White – 112mm 
Code 4 Cast Lead - 450mm x 3m 
Ronseal Multi Purpose Smooth Finish Filler - 600g + 50% Free 
Timco Hazard Tape 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Code 7 Cast Lead - 390mm x 3m 
ALM Code 8 Milled Lead - 760mm x 3m 
Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
Sika Dustproofer – Clear 5 Litre 
Ronseal One Coat Water-Based Tile Paint - White Gloss 750ml 
Sika 1 Waterproofer – 5 Litre 
Easy-Trim Eaves Comb Filler, 1m 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
