Everbuild Stixall Extreme Power – White 290ml 
Timco 30mm Cladding Pin - 250 Pieces 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Hedgehog Gutterbrush Clips (Pack of 20) 
Bond It Trowel Mastic - Black 2.5L 
Bond It Bitumen Paint - Black 25L 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
Soudal PTFE Spray - 400ml 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Armatool Mop Heads Size 12 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Freeflow 65mm Square Down Pipe Connector - Black 
ALM Code 3 Milled Lead - 150mm x 3m 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
Samac Snowguard - 150mm x 2m 
Bond It SBR Admixture - White 2.5L 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
ALM Code 7 Milled Lead - 150mm x 6m 
OB41 Foaming Glass Cleaner - 400ml 
Everbuild EB25 Ultimate Sealant & Adhesive – Black 300ml (Box of 12) 
Everbuild 709 FebFlor Floor-Flex Plus - 5 Litre 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm, continuous pressure, apply a zig-zag motion over the surface, ensuring that when you press the surface together, it spreads, filling the whole surface.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
