Name: Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20)
SKU: CYN2020
Availability: InStock

Uses

The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;

Plastics
Metals
PVCu
EPDM

Preparation

Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+

Application

Unscrew the cap of the product

Squeeze the product to one surface only

Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.

Limitations and Notes

This product should be used in applications that are constantly immersed in water.
Ensure the surfaces are degreased before bonding
Ensure surfaces are close fitting as it doesn't bridge gaps
Do not use on surfaces or products that are bitumen or tar-leaching

Additional information

Weight	0.4 kg
Density	1.05 g/cm³
Viscosity	100-120 poise
Tensile Strength	28-32 N/mm² (steel-steel ASTM D2095)
Shear Strength	15-20 N/mm² (steel-steel ASTM D1002)
Solids	100% active
Flash Point	>85 °C
Impact Strength	1.8 – 2.0 N/mm2 (steelsteel ASTM 950)
Refractive Index	1.46 (cured adhesive)
Hardness	82 (Rockwell cured adhesive)
Specific Resistance	8 x 1012 Ohm/cm (cured adhesive)
Dielectric Const.	3.44 @ 1MHz (cured adhesive)
Softening Point	150 °C
Working Temps.	-60 to +80°C
Setting times	5-60 seconds (plastic to plastic) 2-20 seconds (rubber to rubber) 10-60 seconds (degreased metal to metal)

Technical Data Sheet

Safety Data Sheet

Weight

0.4 kg

Density

1.05 g/cm³

Viscosity

100-120 poise

Tensile Strength

28-32 N/mm² (steel-steel ASTM D2095)

Shear Strength

15-20 N/mm² (steel-steel ASTM D1002)

Solids

100% active

Flash Point

>85 °C

Impact Strength

1.8 – 2.0 N/mm2 (steelsteel ASTM 950)

Refractive Index

1.46 (cured adhesive)

Hardness

82 (Rockwell cured adhesive)

Specific Resistance

8 x 1012 Ohm/cm (cured adhesive)

Dielectric Const.

3.44 @ 1MHz (cured adhesive)

Softening Point

150 °C

Working Temps.

-60 to +80°C

Setting times

5-60 seconds (plastic to plastic)
2-20 seconds (rubber to rubber)
10-60 seconds (degreased metal to metal)

FREE Next Working Day Delivery on Orders over £10*

Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20)

Uses

Preparation

Application

Limitations and Notes

Additional information

Technical Data Sheet

Safety Data Sheet

Product Information

Technical Data Sheet

Safety Data Sheet

Related Products

Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml

Everbuild 404 Fungicidal Wash – 1 Litre

Soudal Orange Skeleton Gun - Up to 400ml

Recommended products

Permavent Easy Slate 600 – Box of 100

Soudal PVCu Solvent Frame Cleaner – 1L

Klober Uni-Plain Tile Vent, KG9918

Get new offers to your inbox.