Everbuild Mitre Fast Industrial Kit Superglue & Activator 
ALM Code 8 Milled Lead - 760mm x 3m 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
Siroflex Trade Clearbond Adhesive Internal Use - Clear 290ml 
Code 4 Cast Lead - 360mm x 6m 
Ronseal One Coat Water-Based Tile Paint - Ivory Satin 750ml 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Timco Screwdriver 8-Tool Set 
Bond It PVCu Solvent Free Cream Cleaner - White 1L 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
Siroflex Trade High Viscosity Superglue - 50g 
Klober Double Pantile Vent - Slate Grey KG9858-3-0429 (Box of 10) 
ALM Code 6 Milled Lead Flashing - 600mm x 6m 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml 
Siroflex Heavy Duty PVCu Solvent Cleaner - 1L 
500 x Felt Support Trays 1.5m (Half Pallet) 
Bond It Patio Blaster - Clear 2.5L 
Bond It Barrier Tape Red and White - 70mm x 500M 
Bond It Rain-Mate All Weather Sealant - White EU3 
Evercryl Emergency Roof Repair - Clear 310ml 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
Everbuild 405 Path & Patio Seal – 5 Litre 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
Unscrew the cap of the product
Squeeze the product to one surface only
Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
