Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Youngman Spacemaker Loft Ladder (30234000) 
Soudal PVCu Solvent Frame Cleaner - 1L 
Code 5 Cast Lead - 180mm x 3m 
Ronseal Multi Purpose Smooth Finish Filler - 1.2kg + 50% Free 
Timco Aluminium Hawk 
ALM Code 5 Milled Lead - 240mm x 3m 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Everbuild Pinkgrip SF Solvent Free Adhesive – 380ml 
Ox Tools OX Pro Aviation Snips With Holster - Left Cut (Red) 
Everbuild 503 SBR Bond – 2.5 Litre 
Everbuild 709 FebFlor Floor-Flex Plus - 5 Litre 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Bond It Contractors PVA - 1L White 
Code 7 Cast Lead - 150mm x 3m 
Freeflow Square Gutter System Gutter 135° Angle - White 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Permavent Black Breather Membrane – 1m x 20m 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
Everbuild 501 PVA - 2.5 Litre 
Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml (Box of 12) 
Soudal Roof & Gutter Sealant – Black 290ml 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Right Hand Klober Contract Dry Verge Unit Brown 
The Profile-Line Limarech Tile Vent is the go-to tile vent for exceptional airflow to concrete interlocking roof tile profiles. This product can achieve the must-have solution to damp roof spaces, functional airflow and ventilation, allowing the attic to breathe. If you don't treat condensation and moisture issues, you may experience further structural issues in the future.
You can use this product not only for attic ventilation but also for soil and mechanical extraction; a must-have for some rooms, especially soil extraction, as this aids the pressure in the toilet system. The installation of this product is easily completed by experienced roofers, with the design sleek and once fitted, flush, discreet and virtually impossible to see. It only weighs less than a Kilogram, allowing easy transport to the site and to the roof, it also makes installing a lot easier.
Installing Klober Limarech Tile Vent
Place the Limarech Tile Vent over the existing tile you want to replace and create a rectangle marking of 120 x 180mm wide. Make a star cut from opposing corners, folding back the four tabs upwards, ensuring the top one is secured to the batten above. You can then place the Tile Vent securely into position using the fixing clips underneath the roof tile's left-hand interlock.
