The Twin Plain tile vent by Klober weighs 0.59kg and comes in four different colours including antique red, terracotta, brown, and slate grey. The roof tile vent is for roof pitches 22.5° and over. When used with Forticrete Gemini we recommend a minimum pitch of 25°.
How to Install a Twin Plain Tile Vent
Before you begin the installation of the twin plain tile vent, determine the tile vent’s position; this must be in line with the tile below. Mark a 120mm x 180mm wide rectangle and make a star cut from opposite corners. Next, fold the four tabs back and upwards and ensure the top tab is secured to the batten above. Finally, fix the vent tile in position, guaranteeing the fixing clip is located under the left-hand interlock of the roof tile.