Everbuild All Purpose Ready Mixed Filler - 1kg 
Everbuild P14 System Inhibitor – 1 Litre 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
ALM Code 4 Milled Lead - 300mm x 6m 
Soudal Grip ALL Solvent-Free - White 290ml 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Lead Sheet Cleaner - 1 Litre 
ALM Code 6 Milled Lead Flashing - 180mm x 3m 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Thompson's One Coat Waterseal - 5L 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
The Thin Line Tile Vent is perfect for installation into interlocking roof tile profiles, with exceptional airflow properties offering up to 10,000mm². It's ideal for combating moisture and condensation building up, alongside attaching to mechanical or soil extraction systems. It's vital to ensure that your attic is ventilated; otherwise, it'll suffer from dampness and, inevitably, further issues.
The installation of this product is effortless for experienced roofers, with it sliding in seamlessly and clipping it. Once installed, it's virtually impossible to see highlighting the sleek design that Klober achieved. Forged from PVCu, it's a naturally lightweight material ideal for transporting alongside coated with Acrylonitrile styrene acrylate (ASA). This excellent UV-resisting coating retains the colour of the tile vent.
Installing Klober Thin Line Tile Vent
To install the tile vent correctly, place the thin line tile vent over the existing tile you want to replace and mark a rectangle of 120 x 180mm wide. Cut into the underlay from opposing corners and fold back the four tabs upwards, ensuring the top tab is secured to the batten above. Place the Thin Line tile vent into position and securely clip it using the fixing clips underneath the left side.
