Timloc Interlocking Plain Tile Vent Red (Box of 12) 
Timloc Underlay Felt Lap Vent (Pack of 10) 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Klober Profile-Line Twin Plain Tile Vent - Slate Grey KG9861-0429 (Box of 10) 
Isoflex Special Primer - 750ml 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
Soudal Soudabond 265 Classic Spray - 500ml 
Everbuild Overlap & Border Adhesive - White 250g 
ALM Code 8 Milled Lead - 150mm x 6m 
OX Tools 600/1200/1800mm Pro Spirit Level Set with Bag 
Ronseal Knot Block Primer & Undercoat - White 250ml 
Code 5 Cast Lead - 1200mm x 3m 
The Uni-Plain tile vent by Klober is a stunning solution for roofers and homeowners who are looking for extra ventilation with a sleek in-line design that makes it mostly invisible on the roofline. The vent itself is made from Polypropylene/PVC and weighs around 0.85kg. The tile complies fully with relevant Building Regulations and British Standards.
How to Install the Klober Uni Plain Tile Vent
The Uni-Plain Tile Vent should be positioned in the broken bond format above the course below to start the installation. The membrane should be marked and carefully cut at the bottom and side to accommodate the downpipe. The underlay flap created should be secured to the batten above and then vent tile can then be nailed into place.
