Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Bond It Patio Blaster - Clear 5L 
Cromar Vent 3 Classic Breathable Membrane - 1m x 25m 
OX Pro Impact Bit Set - 31 Piece 
Code 8 Cast Lead - 1600mm x 3m 
FloPlast Round 92½° Bend - Brown 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Everbuild P14 System Inhibitor – 1 Litre 
ALM Code 3 Milled Lead - 800mm x 6m 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
ALM Code 8 Milled Lead - 850mm x 6m 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Timco Flat Wood Bit 1/4" Extension Rod - 150mm 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild Black Jack 901 Black Bitumen Paint – 2.5 Litre 
Code 5 Cast Lead - 210mm x 6m 
Code 6 Cast Lead - 760mm x 6m 
Code 7 Cast Lead - 1000mm x 6m 
ALM Code 4 Milled Lead - 210mm x 6m 
If you’re laying a lead lined gutter and need a low-cost method of dealing with restricted falls, the Lead Expansion Joint has the problem covered. The Lead Expansion Joint uses a neoprene segment to compensate for lead’s thermal expansion.
Different materials expand at different rates when heated. This can cause damage when lead is fixed in certain positions, since lead expands to a very significant degree when heated. The neoprene segment present in Lead Expansion Joints will stretch and give, allowing this thermal expansion to take place safely. The neoprene itself is integrated into the code 5 lead wings on either side during the vulcanisation process. These wings can then be welded in to the two lead sheets being joined.
