Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Bond It Patio Blaster - Clear 5L 
Cromar Vent 3 Classic Breathable Membrane - 1m x 25m 
OX Pro Impact Bit Set - 31 Piece 
Code 8 Cast Lead - 1600mm x 3m 
FloPlast Round 92½° Bend - Brown 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Everbuild P14 System Inhibitor – 1 Litre 
ALM Code 3 Milled Lead - 800mm x 6m 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
ALM Code 5 Milled Lead - 450mm x 6m 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Klober Flexipipe 75/100mm - (KG972400) 
OX Pro Moulding Bar - 10" / 250mm 
Timco Mixed Cable Clips 
Everbuild 404 Fungicidal Wash – 5 Litre 
Freeflow 68mm Round Down Pipe Shoe - Black 
Code 4 Cast Lead - 914mm x 6m 
Cromar Bitumen Primer – Black 5 Litre 
Klober Thin Line Vent - Terracotta KG9855-3-0152 (Box of 10) 
Uses
The OX Tools OXIT Sealant & Adhesive is a new innovative range offering the ultimate versatility. With excellent adhesive strength accompanied by outstanding joint sealant finishing. It is crafted for heavy-duty automotive and transportation industries. It is also excellent for domestic use. Ideal for use in and around a property, this product is heavily resistant to chemicals, UV light and water.
Preparation
Before starting the application, clean the surface thoroughly to remove all contaminants and prevent any hindrance to adhesion. Common impurities, such as dirt, dust, grease, oil, flaking material, and loose debris, can reduce performance, so eliminating them is essential.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening to your desired amount and screw it onto the cartridge.
- Place the cartridge into a suitable applicator tool.
- For sealant jointing, point the tip of the nozzle to the gap and apply a singular bead along the gap, smoothing it down afterwards using a sealant applicator tool.
