Code 3 Cast Lead - 450mm x 3m 
OX Pro Moulding Bar - 10" / 250mm 
Ronseal 5 Minute Multi-Purpose Smooth Finish Filler - 600ml 
Everbuild Triple Action Wood Treatment – 2.5 Litre 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
OX Pro Aluminium Metric Rafters Square - 180mm 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Timco Lifting Sling 3000kg Limit - 3m x 90mm 
Everbuild KOS Fire Cement Buff – 2kg 
Timloc Plain & Interlocking Tile Vent Adapter 
Estwing Roofers Pick Smooth Face Hammer - 21oz 
Bond It Contractors PVA - 1L White 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Ronseal Crystal Clear Outdoor Varnish - Matt 2.5L 
OX Pro 4 In 1 Heavy Duty Staple Gun 
Soudal Firecement HT, Black - 300ml 
ALM Code 4 Milled Lead - 760mm x 3m 
Timco Impact Driver Bit Set 
ALM Code 7 Milled Lead - 390mm x 3m 
Everbuild Heavy Duty Multi-Use Wonder Wipes Tub (75 Wipes) 
Everbuild Anchorset Green 150 - Grey 150ml 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
Bond It Lead Pro Roofing & Flashing Sealant - Grey EU3 
Soudal Lead Sheet Sealant 290ml - Grey 
Siroflex Trade High Viscosity Superglue - 20g 
Uses
The Anti-Condensation Paint by Ronseal is a high-quality, uniquely formulated paint that completely controls condensation, mould, and general damp issues. This paint, when applied, delivers an added layer of insulation, protecting the paint and your wall from unsightly damage. This type of paint is suitable for scrubbing down when cleaning, making it perfect for bathrooms and kitchens.
Preparation
Before commencing the application, you should prepare the surface. Clean it down to remove any contaminants, and if the surface has mould present, use a dedicated mould killer to remove it. You should not sand it away; all this does is spread the pores, which causes it to spread.
Application
- When opening the tin, thoroughly stir it to mix all the pigments.
- Apply the paint directly to the wall using a brush or roller, ensuring you don't spread it too thinly.
- Allow 4 hours for the first coat to dry, then apply a second. The surface will be touch dry in 2 hours but suitable for painting over in 4 hours.
Aftercare
This paint can be used as a top coat or undercoat; if an undercoat is your intention, you should wait 4 hours for it to dry before applying it. Any leftover paint on tools should be removed and cleaned using warm, soapy water.
