Bond It Trowel Mastic - Black 1L 
Permavent Easy Slate 600 - Pack of 20 
OX Tools OXIT Sealant & Adhesive - White 290ml (Box of 12) 
Everbuild One Strike Filler - White 5L 
Eco-Shovel & Hard Brush Black Large Pan 
Hedgehog Gutter Brush Leaf Guard Black - 4m x 200mm 
ALM Code 6 Milled Lead Flashing - 1600mm x 3m 
FloPlast Half Shed Round Miniflo Water Butt Guttering Pack, Black - 14 Pieces 
Ronseal Multi Purpose Smooth Finish Filler - 600g + 50% Free 
Evo-Stik Liquid Nails Solvent Free - Buff 290ml 
Code 8 Cast Lead - 914mm x 3m 
10 x Permavent Black Breather Membrane – 1m x 50m 
OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
Bond It Monster Wipes - White 75 Wipes 
Armatool Stripping Spade 
Bond It Heavy Duty Gun Foam Applicator 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
Timco Heavy-Duty Tarpaulin - 2m x 3m 
OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
Timloc Non-Profile Tile Vent Red (Box of 8) 
OX Tools OX Pro Aluminium Kevlar Chalk Line Reel and Refill 
Everbuild Pro Fill - Light Grey 500g 
Everbuild 202 Integral Liquid Waterproofer – 5 Litre 
OX Trade Plastering Trowel - 11 inch / 280mm 
Soudal Genius Gun Soudafoam Window and Door - 600ml (Box of 12) 
OX Tools Pro Heavy Duty Flexi Tub - 42L 
Everbuild Mortar & Tile Grout Pro Pointing Gun Kit 
Ronseal Crystal Clear Outdoor Varnish is an outstanding product with an innovative formula that delivers excellent sealing properties without changing the colour of the surface. This high-quality varnish seals the surface, providing excellent water-resisting properties and highlighting the natural wood.
Preparation
To ensure an optimal finish on previously stained or varnish wood, you should sand down the surface using 120-grit sandpaper, working in a circular motion to remove any old varnish or stain. After sanding the surface, use white spirit and a cloth to clean the surface from dust.
When applying to new wood, you should lightly sand the surface using 120-grit sandpaper, ensuring there is no imperfection on the surface. After, use white spirit and a cloth to clean the surface of any leftover dust.
Application
- Open the tin and thoroughly stir it, ensuring no lumps are in the varnish
- Using a brush, apply the varnish brushing in the direction of the wood grain
- Allow six hours to pass for the coat to dry
- To achieve optimal results, you should apply three coats, but before applying the final coat, lightly sand the surface
Aftercare
After the varnish has dried, you can maintain the quality of it by cleaning the surface, ensuring that no grime or dirt builds up. Any tools used during the application process can be cleaned using warm, soapy water. If you notice any damage to the surface, lightly sand the surface and apply the varnish to it.
