ALM Code 8 Milled Lead - 510mm x 6m 
Bond It Silicone Ultra Waterseal - Clear 5L 
Timco Screwdriver 8-Tool Set 
Everbuild Exact Gap Foam - 750ml 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
Timco Copper Slate Straps 
Thompson's Water Seal - 2.5L 
Easy-Trim Universal Dry Verge System Black (Pallet of 800) 
Bond It Mould Stop - Clear 1L 
ALM Code 3 Milled Lead - 800mm x 3m 
Bond It A43 Threadlock Oil Tolerant Adhesive - 25ml Blue 
Bond It Aluminium Foil Tape - 50mm x 45M 
Everbuild 404 Fungicidal Wash – 5 Litre 
Everbuild ASBO Graffiti Remover - 400ml (Box of 12) 
Cromar Black Bitumen Paint – 1 Litre 
Cromar Bitumen Trowel Mastic - Black 2.5L 
ALM Code 4 Milled Lead - 1000mm x 3m 
Siroflex Trade Superglue Activator Spray - 400ml 
Standard Brush 4-Inch 
Ronseal Fence Life Brush - 4" 
Ronseal Precision Finish Brush - 1.5 Inch 
Everbuild EB25 Ultimate Sealant & Adhesive – Black 300ml (Box of 12) 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
OX TOOLTREK Modular Storage System - 3 Piece 
Everbuild Jetcem Plaster Rapid Repair – 6kg 
The Ronseal Crystal Clear Outdoor Varnish - Satin 750ml is an outstanding product with an innovative formula that delivers excellent sealing properties without changing the colour of the surface. This high-quality varnish seals the surface, providing excellent water-resisting properties and highlighting the natural wood.
Preparation
To ensure an optimal finish on previously stained or varnish wood, you should sand down the surface using 120-grit sandpaper, working in a circular motion to remove any old varnish or stain. After sanding the surface, use white spirit and a cloth to clean the surface from dust.
When applying to new wood, you should lightly sand the surface using 120-grit sandpaper, ensuring there is no imperfection on the surface. After, use white spirit and a cloth to clean the surface of any leftover dust.
Application
- Open the tin and thoroughly stir it, ensuring no lumps are in the varnish
- Using a brush, apply the varnish brushing in the direction of the wood grain
- Allow six hours to pass for the coat to dry
- To achieve optimal results, you should apply three coats, but before applying the final coat, lightly sand the surface
Aftercare
After the varnish has dried, you can maintain the quality of it by cleaning the surface, ensuring that no grime or dirt builds up. Any tools used during the application process can be cleaned using warm, soapy water. If you notice any damage to the surface, lightly sand the surface and apply the varnish to it.
