Ronseal 6 Year Anti Mould Paint - White Silk 2.5L 
OX Tools Pro Combination Square 300mm / 12in 
ALM Code 6 Milled Lead Flashing - 180mm x 3m 
Permavent Easy Slate 600 - Box of 100 
Isoflex Special Primer - 750ml 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Code 8 Cast Lead - 450mm x 3m 
Permavent Black Breather Membrane – 1m x 20m 
Bond It Mould Stop - Clear 5L 
ALM Code 5 Milled Lead - 300mm x 3m 
Siroflex Heavy Duty PVCu Solvent Cleaner - 1L 
Ronseal Stays White Ultra Tough White Gloss Paint - 2.5L 
Hedgehog Gutter Brush Leaf Guard Brown – 4m x 100mm 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
OX Trade Stubby Level - 100mm 
Klober Single Pantile Vent - Antique Red KG9860-0116 (Box of 10) 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
Thompson's One Coat Damp Seal - White 2.5L 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
FloPlast Square to Round Downpipe Adaptor - Black 
Easy-Trim Universal Dry Verge System - Brown (Box of 50) 
OX Pro Moulding Bar - 10" / 250mm 
Everbuild PVCu Acti-Spray – Clear 200ml 
Ronseal Precision Finish Brush - 1 Inch Angled 
Ronseal Diamond Hard Doorstep Paint is the go-to choice for anyone looking to bring life and colour to their front door. This thick pigmented paint delivers a vibrant, long-lasting colour that's resistant to various scuffs, knocks and scratches. Ideal for novice D.I.Yers or tradespeople, this product is easy to apply directly from the tin.
Preparation
You must apply this on a dry day when the temperature is above 10°C. Brush your steps thoroughly, removing leaves, moss and twigs, ensuring that it's just a plain substrate, using warm, soapy water to wash the surface. If they have been previously painted, use a wire brush to remove any loose flaking paint, then apply white spirit to clean the surface. Afterwards, ensure the surface is dry before commencing the application.
Application
- Open the tin of paint and thoroughly stir it, making sure all the pigments are mixed.
- Using a brush, apply the first coat to the surface and allow four to six hours for the paint to dry, then apply the second coat.
- Allow another four to six hours for the second coat to dry; you can walk over it once it has.
- After 24 hours, the surface will be completely hard and dry, and the diamond-hard protection will activate.
Aftercare
Looking after the surface is easy, ensuring no loose debris, e.g. twigs, sticks, leaves, or moss growing.
