Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Kwik Flash Lead Tool - Turn In Setting Tool For Lead & Zinc Flashing 
Bond It Trowel Mastic - Black 5L 
Timloc Double Roman Tile Vent Brown (Box of 6) 
ALM Code 5 Milled Lead - 180mm x 3m 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Right Hand Klober Contract Dry Verge Unit Grey 
Freeflow 114mm Square Gutter Fascia Bracket - White 
Everbuild 501 PVA - 2.5 Litre 
FloPlast Half Round Downpipe Branch 67.5°, Black 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
OX Pro Wide Head End Cutting Nippers - 200mm 
Everbuild Forever Grey Silicone Sealant – 295ml 
Everbuild Black Jack 904 Roof Felt Adhesive – 5 Litre 
Spax Magnetic Bit Holder - 1 Piece 
Freeflow Square Gutter System Running Outlet - Black 
ALM Code 6 Milled Lead Flashing - 360mm x 6m 
ALM Code 8 Milled Lead - 510mm x 6m 
FloPlast Half Round Fascia Bracket, White – 112mm 
OX Trade 3 Piece Paint Brush Set - 25/38/50mm 
Ronseal Diamond Hard Doorstep Paint is the go-to choice for anyone looking to bring life and colour to their front door. This thick pigmented paint delivers a vibrant, long-lasting colour that's resistant to various scuffs, knocks and scratches. Ideal for novice D.I.Yers or tradespeople, this product is easy to apply directly from the tin.
Preparation
You must apply this on a dry day when the temperature is above 10°C. Brush your steps thoroughly, removing leaves, moss and twigs, ensuring that it's just a plain substrate, using warm, soapy water to wash the surface. If they have been previously painted, use a wire brush to remove any loose flaking paint, then apply white spirit to clean the surface. Afterwards, ensure the surface is dry before commencing the application.
Application
- Open the tin of paint and thoroughly stir it, making sure all the pigments are mixed.
- Using a brush, apply the first coat to the surface and allow four to six hours for the paint to dry, then apply the second coat.
- Allow another four to six hours for the second coat to dry; you can walk over it once it has.
- After 24 hours, the surface will be completely hard and dry, and the diamond-hard protection will activate.
Aftercare
Looking after the surface is easy, ensuring no loose debris, e.g. twigs, sticks, leaves, or moss growing.
