Lead Sheet Restorer - G3 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
Timloc Non-Profile Tile Vent Brown (Box of 8) 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
Code 7 Cast Lead - 180mm x 6m 
Everbuild Stick2 Industrial Superglue HV – Clear 50g (Box of 25) 
OX Pro Rodless Sealant Gun - Up to 400ml 
Everbuild 405 Path & Patio Seal – 5 Litre 
Bond It Indian Stone Sealer - Clear 5L 
Everbuild Triple Action Wood Treatment – 25 Litre 
Everbuild Heat Mate Silicone Sealant - Red 295ml (Box of 12) 
ALM Code 3 Milled Lead - 914mm x 6m 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Everbuild Black Jack 908 DPM – 5 Litre 
Gorilla Tape - Black (48mm x 11m) 
OX Pro Small Trowel - 200 x 75mm 
FreeFlow Round Gutter System Stopend External - Black 
OX Tools OXIT Sealant & Adhesive - Black 290ml (Box of 12) 
FloPlast Universal Hopper, Brown – 65-68mm 
Hambleside Danelaw TV15/4 Tile Vent - Slate Grey (Box of 5) 
Code 4 Cast Lead - 1200mm x 6m 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
OX Pro Double Handle Pool Trowel 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Bond It B1 Fire Resistant PU Aerosol Expanding Foam - Pink 750ml 
Ronseal 6 Year Anti Mould Paint - White Matt 2.5L 
Eco-Shovel & Hard Brush Black Large Pan 
Everbuild PVCu Solvent Cleaner – 1 Litre 
ALM Code 5 Milled Lead - 760mm x 6m 
Ronseal Trade 10Yr Woodstain Satin Walnut 750ml Brown 
Uses
The 15-Year Protection Direct To Metal Paint by Ronseals offers outstanding protection and vibrant colour to your surface. Ronseal's scientists brewed this formula to deliver exceptional adhesion to various surfaces, including rust! Available in multiple colours and finishes, you can rest assured we have the right choice for you. The surfaces that this paint can be applied onto include;
- Metal
- Wood
- Cast Iron
- Aluminium
Preparation
You must ensure that the surface you're applying the paint onto is free from contaminants that can hinder the paint. If you're applying onto bare metal, remove any loose rust or paint with a wire brush or 120-grit sandpaper. If the metal has been previously painted and is in good condition, lightly sand the surface with 240-grit sandpaper, wiping it down afterwards to remove any dirt present. If the state of the paint is poor, you'll have to remove it using sandpaper or a wire brush, then wipe away any loose dust left over with a damp cloth.
Application
- When opening the paint tin, thoroughly stir it to mix the pigments
- The best application is using a brush or roller, but you can use a sprayer but you'll need to dilute with 10% water.
- Leave about 2 - 4 hours for each coat to dry
- You can apply two coats and leave it there, but optimal results are achieved through a 3rd coat
- The last coat you apply should only take 30 minutes to touch dry.
Aftercare
Remove as much paint as possible when cleaning up after completing the application, then clean your tools with warm, soapy water. DO NOT empty any paint into drains or watercourses; you can contact your local authority, who may have a procedure to eliminate the waste. To maintain a high-quality professional finish, you should check for imperfections every year; if you notice anything, sand the area down and paint the area with another two coats.
