Everbuild Mitre Fast Activator – 200ml 
ALM Code 7 Milled Lead - 180mm x 6m 
Code 8 Cast Lead - 150mm x 3m 
Timloc Double Roman Tile Vent Red (Box of 6) 
Timloc Inline Slate Vent Black (Box of 5) 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
Klober Universal Tile Vent Brown KG9854 (Box of 10) 
Siroflex Painters Caulk-It - 310ml 
Bond It Bitumen Paint - Black 2.5L 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Everbuild Bath & Kitchen Sealant – White 290ml 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
ALM Code 8 Milled Lead - 180mm x 6m 
Siroflex Heavy Duty PVCu Solvent Cleaner - 1L 
Everbuild Industrial Superglue HV - Clear 50g 
Armatool Lead Dresser Set - 5 Piece Set 
Evercryl Emergency Roof Repair - Clear 310ml 
Soudafoam Window & Door Xtra Gun Grade, Champagne - 750ml 
Code 5 Cast Lead - 180mm x 3m 
Everflex Galva Mate Duct Sealant - C3 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
