Easy-Trim Universal Dry Verge System - Grey 
BORA - PM-4500 Speedhorse 
FloPlast Square Line Pipe Connector Black 
OX Trade 14 Drive Socket Set - 35 Piece 
Code 3 Cast Lead - 390mm x 3m 
Everbuild Pinkgrip Dryfix FR – 750ml 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
Code 7 Cast Lead - 850mm x 6m 
ALM Code 5 Milled Lead - 914mm x 3m 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Armatool Leather Belt Black, Large 
OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Soudal Sealant Remover – 400ml 
OX Pro Electricians Chisel - 2¼" X 10" 
Code 6 Cast Lead - 180mm x 3m 
Bond It PVA & Adhesive Sealer - White 500ml 
A one part, high quality, low modulus, sealing material with an added biocide, based on advanced hybrid polymer technology.
Benefits:
- Solvent‐free & low odour.
- Mould resistant.
- Easy to tool and finish.
- Can be overpainted with water based paints.
- UV resistant.
- Quick curing.
- Contains no isocyanates, solvents, silicone and phthalates.
- Excellent adhesion to most surfaces (even moist surfaces).
- For sealing and bonding interior and exterior applications.
- Very low emissions.
Uses
Contains a powerful anti-bacterial and mould resistant formula, designed especially for applications in areas of increased humidity, such as bathrooms and kitchens. Suitable for aluminium, metal, uPVC, glass, glazed ceramics, lacquered wood, brickwork, concrete, and most plastic (except PP, PE and PTFE). Can be used both indoor and outdoor and provides long term weather resistance and UV stability. Seal Pro is also a universal adhesive which bonds to most substrates and can be used on damp surfaces.
Limitations
Can be used on damp, but not saturated surfaces. Over paintable with water-based paints only, test on a small, inconspicuous area first. Do not use on surfaces that bleed oils or plasticisers (such as bitumen) or use on natural stone without the use of a primer. Prestressed PMMA and Polycarbonate (PC) could result in stress cracking of the plastic. Conduct preliminary tests for these substrates.
Preparation
Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion. Surfaces may be moist but not overly saturated with water.
Application
Carefully cut the top of the cartridge taking care not to damage the threaded area. Screw on the nozzle supplied and cut at an angle approximately 45o . Apply, using a standard cauking gun, in a continuous bead along the aperture and leave to fully cure. Smooth the joint by tooling with a soapy solution or using a SEALANT APPLICATOR TOOL. Remove any excess material and clean tools immediately with WHITE SPIRIT. Replace plastic cap after use.
- Coverage Depending upon substrate condition and porosity the approximate coverage rates will be approximately 1m2 per cartridge.
- Colour Available in white.
- Size EU3 plastic cartridge.
