Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
Soudal Soudalead PB Lead Sealant - Grey 300ml 
ALM Code 5 Milled Lead - 510mm x 6m 
Everbuild Bath & Kitchen Sealant – White 290ml 
FloPlast Half Round Downpipe Branch 67.5°, White 
Code 3 Cast Lead - 1000mm x 3m 
OX Pro Super Open Mouth Tool Bag 
Code 7 Cast Lead - 390mm x 3m 
Roughneck® V-Series Axe - 20oz/0.6kg 
ALM Code 6 Milled Lead Flashing - 914mm x 6m 
Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
Bond It Stain Block - 400ml Off White 
Everbuild Patio Wizard – 1 Litre 
Code 8 Cast Lead - 150mm x 3m 
Everbuild PVCu Cream Cleaner - 1 Litre 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
OB41 White Grease Spray - 400ml 
Uses
ButyBand Flashing Tape by Soudal is an excellent product to seal areas of the roof securely, and it is formed with a high-quality butyl rubber that is protected with a layer of PET-reinforced aluminium. It can fill the connection joints around windows and doors and is suitable on surfaces such as;
- Glass
- Steel
- Plexiglas
- Polycarbonate
- Wood
- Aluminium
- PVC
Preparation
Before you apply this product, ensure that you prepare the surface to guarantee optimal adhesion. Remove any contaminants, including dust, dirt, oil, grease and similar impurities.
Application
Remove the protective foil evenly, pressing firmly onto the application area. Use a firm roller to ensure it's applied correctly and that no air bubbles, folds or other problems occur. This is because it affects this product's ability to adhere and protect against weathering. When overlapping two parts of this product, ensure it's at least 5cm.
Limitations
- Do not apply this product to frozen surfaces or surfaces with condensation.
- This product adheres through the impact of pressure applied, not by the duration. This is why a firm roller will aid in securely bonding the surfaces together.
