Everbuild Caulk Once – White 380ml (Box of 12) 
ALM Code 4 Milled Lead - 450mm x 6m 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Code 8 Cast Lead - 360mm x 6m 
OX Pro Magnetic Level 600mm 
Everflex Contract AC95 Intumescent Sealant & Adhesive - White 900ml (Box of 12) 
ALM Code 7 Milled Lead - 760mm x 6m 
Soudal Sealant Remover – 400ml (Box of 12) 
Code 4 Cast Lead - 180mm x 3m 
Timloc Castellated Tile Vent Red (Box of 8) 
Soudal Trade Sanitary Silicone - Clear 290ml (Box of 12) 
Soudal Decorators Caulk White – 290ml 
Code 3 Cast Lead - 210mm x 3m 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
ALM Code 6 Milled Lead Flashing - 800mm x 3m 
ALM Code 8 Milled Lead - 600mm x 6m 
Timloc Non-Profile Tile Vent Grey (Box of 8) 
Soudal Solvent-Free Trade Grab Adhesive - White 290ml 
Everbuild Contract AC50 Acoustic Sealant & Adhesive White - 380ml (Box of 12) 
FloPlast Round 92½° Bend - Black 
FloPlast Half Round Union Unit - Black 
Samac Silicone Bronze Nails - 1kg (45mm x 1.8mm) 
Soudal Soudafoam Gap Filler Hand Held 750ml 
Uses
The Trade Roof & Insulation Foam Genius is a convenient and superb product that provides outstanding polyurethane expanding foam delivered in a reusable container. The Genius Gun cap allows multiple uses out of the same can without concerns of clogging, allowing endless use. The product's formula is unrivalled, providing excellent value and thermal and acoustic insulation that's entirely freon-free. It's elastic, compressible, fast curing and suitable for use onto most common surfaces except PE, PP and PTFE.
Preparation
Due to the nature of this product, its expanding properties and excellent adhesion allow it to fill voids effectively. However, brushing the area is a good practice, as it removes any organic growth, small debris, dust, or grease.
Application
- Shake the can thoroughly for at least 20 seconds
- Open the cover and fold the tube perpendicular to the can
- Slightly moisten the surfaces with a water spray
- Fill the 1/3 of the void, allowing the expanding foam to fill the rest
- Ensure as you continue applying, you continue to shake the can in intervals
- If you're applying in layers, allow the one prior to cure, slightly moisten the surface and apply another layer on top
Limitations and Notes
- Any cured expanding foam must be removed mechanically.
- Uncured expanding foam can be wiped away with a wet cloth.
- Slightly moistened surfaces enhance curing, adhesive, and yield.
