Bond It Mould Stop - Clear 2.5L 
ALM Code 7 Milled Lead - 1600mm x 6m 
Cromar Bitumen Trowel Mastic - Black 2.5L 
Code 3 Cast Lead - 360mm x 6m 
Bond It Cover-It Carpet Protector - Clear 625mm X 25M 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
D4 Wood Adhesive – 1 Litre 
ALM Code 6 Milled Lead Flashing - 450mm x 3m 
Thompson's One Coat Damp Seal - White 2.5L 
Code 8 Cast Lead - 510mm x 3m 
ALM Code 5 Milled Lead - 1000mm x 3m 
Code 4 Cast Lead - 210mm x 3m 
Code 5 Cast Lead - 240mm x 6m 
Everbuild Industrial Superglue HV – Clear 20g 
FloPlast Half Round Downpipe Shoe, Black – 68mm 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Brown - 300ml (Box of 12) 
Gorilla Wood Glue - Brown 1L 
Thompson's One Coat Damp Seal - White 750ml 
Uses
Stain Block Damp Seal by Thompson's delivers excellent properties, restoring walls and ceilings to their original glory. Thompson's Scientist brewed this product with a low odour, solvent-based, highly pigmented acrylic system, allowing a consistent and effective restoration.
Preparation
Ensure that before you begin the application, you remove the source of dampness. Additionally, remove any wallpaper and flaking paint with a damp cloth, and any cracks or holes should be filled. Open all doors and windows to make a well-ventilated room, and note that you can apply this product to a damp surface, not a dripping wet one.
Application
- Give the tin a thorough stir
- Using a brush or roller
- Dip it into the paint and apply directly to the affected area, plus 30cm around it.
- After 2 hours, the first coat will dry. However, don't apply the second coat or decorate on top until 4 hours after.
Limitations
- Do not apply this product if the air or surface temperature it below 10°C.
- This product isn't suitable for external surfaces, below ground level or where efflorescence is present.
- Before commencing treatment, ensure you prevent all causes of dampness, including structural and plumbing faults and rising dampness.
