FloPlast Half Round Gutter Angle 135°, Brown – 112mm 
Everbuild XT44 Maintenance Spray - 400ml 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Code 5 Cast Lead - 850mm x 3m 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Ronseal 3 in 1 Mould Killer - 500ml 
Youngman Double Section Roof Ladder 3.77m (57663600) 
Everbuild 405 Path & Patio Seal – 25 Litre 
Klober Small Slate Vent - Slate Grey 
OX Trade Torpedo Level 230mm / 9in 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Ronseal Stays White One Coat Non-Drip Paint - Satin 2.5L 
Soudal Soudafoam Hand Held One Shot - 150ml (Box of 12) 
Everbuild Resiblock Trade – Clear 5 Litre 
ALM Code 6 Milled Lead Flashing - 150mm x 6m 
Bond It Anchor Bond Applicator - Blue 400ml 
Armatool Flooring Kneepads 
Hedgehog Gutter Brush Leaf Guard Black - 4m x 200mm (Pallet of 24) 
Bond It Contractors Grade PVA White 500ml - Box of 20 
Samac Half Round Snowguard Bracket - 225mm (9") 
ALM Code 3 Milled Lead - 450mm x 3m 
Gorilla Glue - Dark Brown 1L 
Ronseal Crystal Clear Outdoor Varnish - Satin 2.5L 
Klober Single Pantile Vent - Terracotta KG9860-0152 (Box of 10) 
Klober Uni-line Vent Slate Grey 
Timco Firmahold Hammer Tacker 
Permavent Easy Slate 500 - Box of 100 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack Dry Fix Accessories
Best Sellers
-
Bond It No Crack Caulk – White 310ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Code 8 Cast Lead – 914mm x 6m
£631.18 Incl VAT £525.98 Excl VAT Add to basket -
Timco Impact Driver Bit Set
£13.99 Incl VAT £11.66 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 240mm x 3m
£50.98 Incl VAT £42.48 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 1000mm x 3m
£215.23 Incl VAT £179.36 Excl VAT Add to basket -
Aluflow Rock N Lock Gutter Bracket – (RAL Colours)
£13.70 Incl VAT £11.42 Excl VAT Read more
Dry Fix Accessories
While it is common to sometimes mortar in the ends of the roof verge even in a structure that is otherwise dry fix, for roofers looking for a totally dry tiling arrangement the Easy Trim End Cap and Starter Unit are vital. These are both made of a polypropylene polymer that is highly resistant to heat, weather, and UV rays. In addition, both are totally watertight, protecting the vulnerable underbelly of the verge tiles from the weather and also any wayward wildlife.
Why should I use an End Cap and Starter Unit?
The End Cap and Starter Unit are important because they serve to seal off each end of a set of verge tiles without any need for mortaring. The less a roof relies on mortaring, the more resistant to the weather it is and the more it can flex to absorb damage.
The Starter Unit is mounted where the verge meets the eaves of the roof. The End Cap on the other hand is mounted where the verge meets the ridge at the top of the roof. Both are critical to implementing a full dry fix roof.
