FloPlast Square Line Pipe Connector White 
Code 8 Cast Lead - 240mm x 6m 
Timloc Rad-Seal Recessed 
Bond It AS900 Acoustic Sealant - White 900ml 
Timloc Thin Leading Edge Tile Vent Black 
Code 3 Cast Lead - 450mm x 3m 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Armatool Lead Dresser Set - 5 Piece Set 
Sikagard Woodworm Killer - 5 Litre 
ALM Code 5 Milled Lead - 390mm x 6m 
Ronseal One Coat Stays White Radiator Paint - Satin 750ml 
Everbuild Wet Rot Wood Hardener – 250ml 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
ALM Code 3 Milled Lead - 800mm x 6m 
FloPlast Square Line Running Outlet White – 114mm x 65mm 
Cromar Bitumen Primer – Black 2.5 Litre 
Armatool 30m Longo Chalk Line 
Soudal Orange Skeleton Gun - Up to 400ml 
Bulk Pallet 72 Packs- FirmaHold 2.8 x 63/3CFC Collated Clipped Head Nails & Fuel Cells - Ring Shank 
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages) Dry Hip Systems
Best Sellers
-
Ronseal Stays White 2in1 Paint & Primer – Gloss 2.5L
£24.99 Incl VAT £20.83 Excl VAT Add to basket -
Samac Snowguard – 150mm x 2m
£39.50 Incl VAT £32.92 Excl VAT Add to basket -
DeWalt 18V XR Compact Jobsite Blower Bare Unit – (DCV100-XJ)
£82.99 Incl VAT £69.16 Excl VAT Add to basket -
ALUKAP-XR Wall Bar, RAL Powder Coat
From: £222.36 Incl VAT £185.30 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Stixall Extreme Power – Clear 290ml (Box of 12)
£48.49 Incl VAT £40.41 Excl VAT Add to basket -
ALM Code 8 Milled Lead – 914mm x 6m
£625.87 Incl VAT £521.56 Excl VAT Add to basket
Dry Hip Systems
Dry Hip Systems are designed to hold hip tiles in place without needing to mortar them in place.
What are hip tiles?
Hip tiles are a special type of tile that covers the gap created when conventional roof tiles converge at corners.
What do hip support trays do?
Hip tile support trays go underneath the hip tiles and are fixed in place with plastic unions and screws. This gives hip tiles some extra support which allows them to hold onto their place in the roof without any need for mortar.
Why should I use a dry hip system instead of just mortaring the tiles in place?
Mortaring the tiles in place makes the entire roof more vulnerable to chronic damage from the wind and the elements. When the wind blows on a mortared roof, the roof cannot flex and the tiles themselves take the damage.
However, nowadays tiles can be locked in place using a dry fix system which includes products like dry ridge. In this system the hip, verge and ridge tiles are locking in with various plastic parts and screws but no mortar, allowing them a small degree of give. This allows a roof to flex in the face of the elements and absorb kinetic energy far more safely than a mortared roof would. A hip support tray is a vital part of this dry fix system – and therefore a vital road to saving you money and time that would be spent on maintaining a mortared roof.
