Code 6 Cast Lead - 240mm x 3m 
Everbuild Caulk Once – White 380ml (Box of 12) 
Timco Driver and Ground Jobber Bit Set 
Ronseal Exterior Yacht Varnish - Gloss 1L 
FloPlast Half Round Stop End Outlet, Brown – 112mm 
Restec GRPROOF 1010 Base Coat Resin - 10kg 
ALM Code 5 Milled Lead - 1600mm x 3m 
Ronseal One Coat All Surface Primer and Undercoat - White 2.5L 
Restec GRPROOF 1010 Top Coat Resin - 20kg 
Siroflex PVCu Trim & Mitre Cutter 
Oxyturbo Oxygen Refill 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml 
ALM Code 6 Milled Lead Flashing - 360mm x 6m Fascia Vents
Best Sellers
-
Spax Pozi Flat Countersunk Yellow Coated Screws – 5.0mm Diameter (Box of 100)
From: £6.26 Incl VAT £5.22 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Tecnic Joint Backer Rod – 10mm x 10m (Box of 12)
£131.88 Incl VAT £109.90 Excl VAT Read more -
Code 8 Cast Lead – 1200mm x 6m
£828.24 Incl VAT £690.20 Excl VAT Add to basket -
Code 7 Cast Lead – 510mm x 3m
£157.08 Incl VAT £130.90 Excl VAT Add to basket -
Samac Galvanised ELH Felt Nails – 50mm x 3.00mm
From: £6.70 Incl VAT £5.58 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudafoam Window & Door Hand Held – 750ml
£9.98 Incl VAT £8.32 Excl VAT Add to basket
Fascia Vents
Fascia Vents enable secure and high volume ventilation at the eaves of the roof. Our ventilation units are suitable for any regular, cold roof with a pitch of 15º or higher. The units are interlocked and nailed to the top of the fascia board to form a continuous ventilation channel between the roofing felt and fascia.Â
At ERoofing, you can buy fascia vents in different pack sizes to suit your needs. If you need more information or advice, get in touch with our support team, who will help.
Installing Fascia Vents
The over fascia vents should be positioned straight on top and fixed to the fascia board through the nail holes using corrosion-resistant nails. The subsequent units should be set together with the slide & lock mechanism and set continuously along the eaves.
