ALM Code 7 Milled Lead - 240mm x 6m 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Brown (Box of 5) 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
Code 6 Cast Lead - 1200mm x 6m 
Soudal Silirub 2, White - 300ml (Box of 12) 
Klober Uni-Plain Roof Tile Vent Adaptor & Flexipipe - KG992800 
Timco Mixed Cable Clips 
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack 
OX Pro Chalk Refill, White – 226g 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Everbuild Glass Cleaner - 1L 
Soudal Soudatherm Roof 250 - 800ml 
ALM Code 3 Milled Lead - 1200mm x 6m 
Soudal Solvent-Free Trade Grab Adhesive - White 290ml 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
Soudal Construction Silicone, Grey - 290ml 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
Klober Univeral Angle Ridge End - Grey 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Cromar Bitumen Primer – Black 1 Litre 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml (Box of 12) 
Soudal Butyrub Non-Setting Mastic - Black 300ml (Box of 12) 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
OX Pro Grout Remover Replacement Blades 50mm - Pack 2 
Timco Heavy Duty Tarpaulin - 4m x 5m Shed Felt
Best Sellers
-
FloPlast Half Round External Stop End, Black – 112mm
£3.99 Incl VAT £3.33 Excl VAT Add to basket -
OX Trade Fibreglass Handle Claw Hammer – 16oz
£12.99 Incl VAT £10.83 Excl VAT Read more -
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent – Slate Grey (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
Easy-Trim End Cap Half Round – Black (Box of 10)
£29.99 Incl VAT £24.99 Excl VAT Add to basket -
Timloc Mini Castellated Tile Vent Brown (Box of 14)
£279.86 Incl VAT £233.22 Excl VAT Add to basket -
ALM Code 4 Milled Lead – 360mm x 6m
£124.61 Incl VAT £103.84 Excl VAT Add to basket
Frequently Asked Questions (3)
Yes, shed felt should be used on a shed as it helps prevent water entering your shed and will keep your belongings in the shed dry.
There are many brands offering shed felt. At ERoofing, we recommend using IKO shed felt or Icopal shed felt.
You could opt for felt shingles if you're not looking to use a typical shed. They offer a more stylistic look and can easily be laid without much roofing experience.
Shed Felt
We stock a great range of shed felt and roof felt perfect for your home DIY project. If you need any advice on how to felt a shed roof or the amount of felt you may need, then give us a shout or read one of our guides. Browse through our range of cost-effective, easily applied shed felt.
Replacing Shed Felt
If you need to replace your shed felt due to leaking or a simple cosmetic tear, ERoofing will have the perfect choice for you. From Chesterfelt to Icopal, we stock various suppliers that hold high-quality shed felt fit your shed or garden bar. The shed felt we stock can be felted with nails or appropriate adhesive. If you’re unsure of what you need, make sure to get in touch with us to talk about replacing or repairing your shed roof.
Alternatives to Shed Felt
If you’re not looking to use shed felt or have some reservations, you can always try out EPDM membranes. They are gradually a safe potential alternative for small garden buildings.
Installing & Laying Shed Felt
To get started, make sure to delicately terminate any existing timber fascia boards applied to the front, back and flanks of your shed. Being careful is critical as you don’t want to cause any damage. Next, use a solid hammer to remove the nails holding down the old felt roof, then strip the old felt. Make sure the surface is free and dry. If you notice any nails sticking out or missing, please replace them promptly.
You will need enough felt to cover the entire roof area with a bit of extra on each edge, around 2 inches, as this allows for overlaps.
You will need to cut three pieces of felt. Two pieces for each side of the pitched roof, and a third piece that will overlay the two side sections on each side and run along the top ridge of the shed. Apply the cut felt to either side of the roof, stretching it tight so that it lies flat before nailing it at around 10cm intervals along the length of the roof, just below the apex. Following, you can hammer in the nails along the bottom edge of the roof at wider intervals, around one every 30cm.
Once you’ve secured the side panels in place, add the top section to the ridge and fix it using high performance felt adhesive applied with a paintbrush, then hammer it at the lower edge at 5cm intervals.
Tidy up the overlap at each edge by folding it down and nailing it securely. Next, use your craft knife to cut a slit in the felt overhang at the apex of the roof, then fold the felt down there and nail securely at 10cm intervals along the roof. Use wood nails to fasten them in place and your craft knife to trim away any excess material.
