Everbuild Glass Protector - Red (600mm x 25m) 
ALM Code 6 Milled Lead Flashing - 510mm x 6m 
Code 7 Cast Lead - 300mm x 3m 
Code 6 Cast Lead - 1200mm x 6m 
Bond It Contractors PVA - 25L White 
Everflex Premium+ 450 Builders Silicone – Translucent 300ml (Box of 25) 
Soudafoam Gap Filler Gun Grade – 750ml (Box of 12) 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Ronseal 6 Year Anti Mould Paint - White Matt 750ml 
Soudal Orange Skeleton Gun - Up to 310ml 
Code 5 Cast Lead - 760mm x 3m 
DeWalt 18V XR Compact Jobsite Blower Bare Unit - (DCV100-XJ) 
Bond It Rubber Bitumen Emulsion - Black 5L 
Bond It Pro-Mate LMA Silicone - White EU3 
Timco Premium Dry Diamond Core Drill Kit 5pcs 
Sikabond PVA - White 5 Litre 
Preparation
Prepare the surfaces before application, and remove any contaminants that are present, this includes dust, oil and grease. Suppose the application area has imperfections on the surface, for example, cracks or holes. In that case, you must repair this before applying the coat.
Application
- Ensure the area of application is well-ventilated. Shake the can until the mixing ball rattles back and forth for at least 1-2 minutes.
- Spray directly onto the surface, applying the coat evenly, holding the can about 20-30cm away from the surface.
- Apply 2-3 coats depending on the stain; give around 15 minutes between each coat.
- Depending on the environment and porosity of the surface will affect the drying time. Despite that, it takes about 2 hours on average for the surface to be prepared for decoration.
Limitations
You should not apply this product whilst the temperature is below 10°C or on a surface with an RH reading of 90% or above.
Coverage
One 400ml can cover 0.75m² dependent on the porosity of the surface.
