Everbuild General Purpose Silicone - Grey 280ml (Box of 12) 
Ronseal Wet Rot Wood Hardener - 750ml 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
FreeFlow Round Gutter System Stopend External - Black 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Code 4 Cast Lead - 360mm x 3m 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml (Box of 12) 
FloPlast Half Round Line Pipe Socket, White 
Siroflex Painters Caulk-It - 310ml 
Thompson's One Coat Waterseal - 1L 
Soudal Bathroom & Kitchen Silicone - White 290ml (Box of 12) 
ALM Code 5 Milled Lead - 390mm x 6m 
Code 3 Cast Lead - 300mm x 6m 
Bond It Cove-Mate Coving Adhesive - White EU3 
Uses
The Aluminium Solar Reflective Paint by Bond is an excellent solution to combating solar heat, light, and the degradation and heat gain caused by it. This paint is forged using a thin, bituminous-based aluminium coating of brushing consistency that dries into a silvery finish. It's ideal for application onto roof spaces, it can also be applied directly over other bituminious coatings, sealing primers, paints, or similar products.
Preparation
Ensure the surface is structurally sound and free from contaminants that can hinder the adhesion, including dirt, dust, grease, oil, etc. Any organic growth must be removed, which is best achieved using a fungicide. Some weathered surfaces may require a bitumen primer to be applied prior to ensuring optimal bonding.
Application
- Stir the product very thoroughly before using it.
- Do not thin the paint; apply immediately and continue stirring it throughout the application.
- Apply to the surface using a brush or pile roller, taking care not to apply too thin of a coat.
- Allow a sufficient amount of time to dry before applying a second coat, which can take up to 1 hour.
Limitations and Notes
- When applying the solar reflective paint on a bitumen surface, you must allow;
- Hot Applied Coating - 24 Hours
- Solvent-Based Coating - 10 Days
- Water-Based Coating - 14 Days
