Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Timloc Multi Stepped Duct Adaptor (Fits 100/110/125/150mm Duct) 
OX Pro Heavy Duty Wrecking Bar - 24" 
ALM Code 8 Milled Lead - 510mm x 3m 
Ronseal One Coat Stays White Radiator Paint - Satin 250ml 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
ALM Code 7 Milled Lead - 850mm x 6m 
Code 7 Cast Lead - 240mm x 3m 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
Ronseal Trade 10Yr Woodstain Satin Walnut 2.5ltr Brown 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
Timco Aluminium Hawk 
ALM Code 5 Milled Lead - 1600mm x 3m 
Left Hand Klober Uni-Click Dry Verge Units Terracotta 
Bond It Mega Stik PU Adhesive - Beige 750ml 
Code 4 Cast Lead - 1600mm x 6m 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Bond It Foil Safe Solvent Cleaner - Clear 1L 
OX Pro Tough Nylon Braided Builders Line 105m / 350ft - Cyan 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml 
Timco High Visibility Wet Paint Tape 
Everbuild Quick Drying Clear Varnish - Matt 2.5L 
OB41 White Grease Spray - 400ml 
Uses
Bond It Bituminous paint is crafted to deliver waterproofing and overall weather protection for various surfaces, it provides an odourless and taint-free film which defends against corrosion and decay. Surfaces that are suitable for this product include;
- Steelwork
- Concrete
- Ferrous and non-ferrous metals
- Felt
- Fibre cement
- Corrugated iron
- Asphalt
- Wood
Preparation
Surfaces must be prepared before you can start application, remove any contaminants that can interfere with the bituminous paint, such as oil, dust, grease or similar impurities. Any organic growth that is present should be removed MOULD STOP as it's effective and killing and prevents further growth for months. Rust must be removed with a wire brush and treated with rust inhibitor primer.
Once you've treated the surface and given the appropriate remedial work, ensure there is no water on the surface as it can interfere with the bituminous paint.
Application
This product is supplied ready to use and shouldn't require any thinning.
- Apply using a brush, roller or spray
- Apply at least two coats giving 6 hours between each coat.
Limitations
It is not suitable to use this product when;
- In areas where solvent contact is likely
- Use for potable drinking water tanks.
- Bitumen paint can bleed through any paint applied on top of it; it is suggested that you use a primer recommended by the paint manufacturer before applying any paint on top.
