Hedgehog Gutter Brush Leaf Guard Black – 4m x 150mm 
Timco 65 x 3.75 Galvanised Clout Nails - 1kg 
Soudal Trade Roof & Insulation Foam Genius - 600ml 
ALM Code 4 Milled Lead - 1000mm x 3m 
OX TOOLTREK Modular Storage System - 3 Piece 
Soudal Glass and Mirror Cleaner - 1 Litre 
Bond It Stain Block - 400ml Off White 
Bond It The Beast PU Adhesive - Brown 250ml 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Everbuild KOS Fire Cement Buff – 500g 
Ronseal Precision Finish Brush - 2.5 Inch 
Soudal Decorators Caulk White – 290ml 
Code 6 Cast Lead - 180mm x 6m 
ERoofing Lead Hall Clips – Pack of 50 
Bond It Patio Blaster - Clear 5L 
ALM Code 7 Milled Lead - 1000mm x 6m 
Everbuild General Purpose Silicone - Grey 280ml (Box of 12) 
Over Fascia Vent, 25mm Single 
Everbuild P18 Gas Leak Detector - 400ml 
Samac Snowguard - 150mm x 2m 
OB41 Foaming Glass Cleaner - 400ml 
ALM Code 6 Milled Lead Flashing - 850mm x 3m 
Armatool Leather Belt Black, Large 
Bond It Dec-Mate Flexible Filler - White EU3 
Uses
The Rubber Bitumen Emulsion by Bond is excellent and highly effective at providing a damp-proof membrane in sandwich constructions and water protection for floors, walls, and other above-ground structures. It's formed into a bituminous waterproofing compound that can also act as a curing membrane when applied to green concrete. This product can also be an equally effective adhesive for wood blocks, wood mosaic panels, insulation boards, expanding polystyrene, and cork panels.
Preparation
Preparing the surface should be done in accordance with the British Standard 8102 Code of Practice—for the protection of buildings against water from the ground. Besides that, cleaning the surface and removing any contaminants that can hinder this product's adhesion, including dirt, dust, grease, oil, organic growth, etc., should be removed.
Application
- This product should be applied via brush.
- When applying it to damp-proof floors, apply two coats with the second brushed perpendicular to the first, then apply a 50mm sand/cement or concrete screed on top.
- For weatherproofing walls, it depends on how damp they are. If it's extremely damp, hack away to the brickwork and apply three coats of the emulsion to the interior and if you can, exterior as well.
- If they aren't as damp, but damp is present, remove any paint or wallpaper and lightly dampen the wall with water, then apply three coats over. Ensure when applying to internal walls, you allow a 300mm deep horizontal strip along the top of the wall to allow any moisture to escape via evaporation.
