OX Pro Gauging Trowel - 7" / 180mm 
OX Pro 4 In 1 Heavy Duty Staple Gun 
ALM Code 5 Milled Lead - 510mm x 3m 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
Soudal Orange Skeleton Gun - Up to 310ml 
Code 7 Cast Lead - 510mm x 3m 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Bostik Express Cement Pointing Mortar Buff – 310ml 
Ronseal Precision Finish Brush - 1.5 Inch 
Timloc Plain & Interlocking Tile Vent Adapter 
ALM Code 8 Milled Lead - 760mm x 3m 
OX Pro Double Handle Pool Trowel 
ALM Code 4 Milled Lead - 360mm x 6m 
Timco Hazard Tape 
20 Boxes x Extra Large Head Clout Nails, Galvanised 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Timco FirmaHold Brad Austenitic Stainless Steel Nails - 16G x 64mm Qty 2000 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Brown (Box of 5) 
Over Fascia Vent, 25mm Single 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
Bond It Contractors PVA - 1L White 
OX Pro Mortar Spike, 300mm 
Bond It Bitumen Primer - Black 2.5L 
Uses
The Aluminum Paint by Cromar is an exceptional, high-performance roof coating that defends against the harmful effects caused by sunlight, reflecting UV rays away from the substrate below and extending the roof's lifespan. Cromar's aluminium paint can be applied directly to bituminous roofs, which is perfect for protecting them, whether it's roofing felt or bitumen paint. Other application areas include exposed steel, corrugated iron, and other metallic surfaces; even mineral surfaces, including concrete, are suitable.
Preparation
Before commencing the application, preparing the area is vital to achieve optimal and professional results. Start by cleaning the surface, removing contaminants that can hinder the adhesion of the paint, including dirt, dust, grease, oil, loose debris and even organic growth. A stiff brush is the best tool to clear the surface of impurities, but a fungicide is recommended for organic growth as it will kill them and prevent them from returning. Roofing felt should receive a primer, and then they're ready for the aluminium paint.
Application
- Any fresh bitumen coating on the roof must have 3 - 5 days of curing before applying the aluminium paint.
- Stir it thoroughly before use.
- Using a brush or airless spray, apply the first coat to the surface and allow it to dry.
- Once it's dried, apply the second coat to the surface.
- Take care not to apply either coat too thick; otherwise, bronzing may occur. Bronzing can also happen if rain falls before it's cured.
